Model :

Hardware Version :

Firmware Version :

ISP :

Hi,
I have a T1600G-52TS with 3 VLANS configured as follows:
1: VLAN1 192.168.0.0/24, one port "32" used for configuration;
2: VLAN10 192.168.10.0/24 16 ports which is used for voice;
3: VLAN20 192.168.1.0/24 31 ports used for data.

Vlan1 and Vlan20 are working as expected and devices on vlan20 receive their addresses from the dhcp server. However devices on vlan10 receive nothing. If a pc is connected to the appropriate port on the router it receives the correct IP address. It appears that VLAN10 is not relaying dhcp. Nothing that I have tried has worked and I am looking for suggestions that may help get around this issue. Thank you
Tony