CPE510 causing Network loops?
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
CPE510 causing Network loops?
I am using 2 CPE510's to extend a LAN to a remote site. At least once a day the far end is not reachable, and the switches are acting like there is a loop in the network. The upstream devices are not effected, but the down stream devices are seeing the MAC addresses being advertised back from the CPE510.
Anyone else have this issue and have fixed it? This started after I put these devices in. There are no logs in the TP-Link devices.
