how to configure this ip address

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

how to configure this ip address

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
how to configure this ip address
how to configure this ip address
2019-06-23 08:00:39 - last edited 2021-04-19 12:08:27
Model: TL-R480T+  
Hardware Version: V9
Firmware Version: 9.0.1 Build 20180117 Rel.30328

Hello all,

We have got TATA Internet ISP. We asked for 5 public ip's.

They had provided 1 wan 1p and 5 lan ip pool.

 

I need this to be configured in a Load balancer router tplink.

 

 

Public WAN IP: 61.X.X.X subnet: 255.255.255.252

Public Lan IP Pool: 111.X.X.1 to 111.X.X.6  subnet 255.255.255.248.

gateway:111.X.X.7.

 

Could some one help in this ? 

  0      
  0      
#1
Options
1 Reply
Re:how to configure this ip address
2019-06-24 05:38:39 - last edited 2021-04-19 12:08:27

RinkuSingh wrote

Hello all,

We have got TATA Internet ISP. We asked for 5 public ip's.

They had provided 1 wan 1p and 5 lan ip pool.

 

I need this to be configured in a Load balancer router tplink.

 

 

Public WAN IP: 61.X.X.X subnet: 255.255.255.252

Public Lan IP Pool: 111.X.X.1 to 111.X.X.6  subnet 255.255.255.248.

gateway:111.X.X.7.

 

Could some one help in this ? 

 

Hi RinkuSingh

 

If you need to use the public IP address for the devices in LAN, you can use one to one NAT function. Your WAN IP should use the static IP address, then you can set up one to one NAT. It can make your devices use the public network address(111.X.X.1 to 111.X.X.6) to access the internet. And the others can access your devices through your public network address(111.X.X.1 to 111.X.X.6).

  3  
  3  
#2
Options