Business Community > All Threads > CPE210 V3 firmware upgrade
< All Threads

CPE210 V3 firmware upgrade

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

CPE210 V3 firmware upgrade

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
CPE210 V3 firmware upgrade
CPE210 V3 firmware upgrade
2019-11-03 15:52:00
Model: CPE210  
Hardware Version: V3
Firmware Version: 2.2.0 Build 20190125 Rel. 36261 (0000)

Hey there. I'm having some connectivity instability between two CPE210 antennas I've bought recently, and I'd like to check if there's a firmware upgrade for them. The prolem is - I bought them from a shop in Brazil, but the hardware version is V3, which is not sold here; so I'm assuming they're from another region.

 

Is there a way to figure out what's the right firmware for them? The shop where I bought them hasn't replied my emails and so far I found the UN and EU versions. They were shipped with 2.2.0 Build 20190125 Rel. 36261 (0000), IC 8853A-CPE210, FCC ID TE7CPE210V3

 

Thank you!

  0      
 
  0      
 
#1
Options
2 Reply
Re:CPE210 V3 firmware upgrade
2019-11-04 02:05:16

@vsav 

Your CPE210 should be UN because the firmware is 20190125 Rel. 36261 (0000) and 0000 mean UN.

You can find the new firmware on the offical web.

https://www.tp-link.com/en/support/download/cpe210/#Firmware

 

 

  0  
  0  
#2
Options
Re:CPE210 V3 firmware upgrade
2019-11-04 10:08:21 - last edited 2019-11-04 10:15:44

 

vsav wrote

Is there a way to figure out what's the right firmware for them?

 

Latest firmware for CPE210 V3 is Pharos V2.2.1:

https://static.tp-link.com/2019/201907/20190725/CPE210(EU)_V3.0_2.2.1%20Build%20190620.zip

 

Latest firmware for CPE210 V3.20 is Pharos V2.2.0:

https://static.tp-link.com/2019/201910/20191009/CPE210(UN)_V3.2_2.2.0%20Build%20190815.zip

 

You can try whether Pharos 2.2.1 for CPE hardware V3.0 will install on hardware V3.20, too. If it does not fit, the CPE will refuse to install it.

 

The shop where I bought them hasn't replied my emails and so far I found the UN and EU versions.

 

Pharos devices store region information in a separate partition of their flash rom, not in the firmware. Thus, there are no different firmware versions needed for EU/US regions, they are always UN (»universal«, meaning one firmware only for any region). The firmware will adapt itself to the correct region according to the region information in the flash rom.

 

TP-Link Argentina once managed to offer three differently named ZIP archives, one for EU, one for US and one for UN devices, which all three contained the exact same UN firmare image (see this post).

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 5123

Replies: 2

Related Articles
CPE210 V3 CPE Outdoor Power Transmit Legacy
226 0
cpe210 not working
2225 0
TL-SG108E v3 Firmware Upgrade
2269 0
CPE210 Frequent dropouts?
6382 0
CPE210 in repeater mode --
3451 0
CPE210 performing very poorly
622 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.