Business Community > All Threads > EAP225 outdoor EU upgrade failed
< All Threads

EAP225 outdoor EU upgrade failed

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

EAP225 outdoor EU upgrade failed

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
EAP225 outdoor EU upgrade failed
EAP225 outdoor EU upgrade failed
2020-02-14 16:19:04
Model: EAP225-Outdoor  
Hardware Version: V1
Firmware Version: 1.6.1 Build 20191022 Rel. 41405

Hello.

 

Does anaybody have a solution to upgrade problem.

 

The problem was that i want to apply firmware 1.6.0 on eap225 and i cannot (upgrade failed).

 

Why i do that : because after upgrade to 1.6.1 firmware AP become unusable after 10 days of working.

 

Thanks community

 

Perhaps no response until 1 week i'm out of work for 1 week.

  0      
 
  0      
 
#1
Options
4 Reply
Re:EAP225 outdoor EU upgrade failed
2020-05-07 00:38:48

@plavielle I too am having this problem...

  0  
  0  
#2
Options
Re:EAP225 outdoor EU upgrade failed
2020-05-07 00:53:37

@plavielle My goal was to upgrade to EAP225-OUTDOORv1_1.7.0_[20200113-rel35383]_up_signed.bin.  Even re-installing 1.6.1 I'm getting the same error.  I'm running controller version 3.2.10.  My EAP 245's upgraded fine - just this new outdoor EAP that I'm doing a PoC of.

  0  
  0  
#3
Options
Re:EAP225 outdoor EU upgrade failed
2020-05-11 07:16:05

@WirelessForEver 

After a complete reset of the AP (power off + physical reset), i was able to make firmware downgrade.

But i've stbility problems. And the problem was that i have only eap 225 in my infrastructure.

What i've done to make all work well : setup security to WPA2-TKIP. Only TKIP make all my device (computer and mobile device) stay connected.

  0  
  0  
#4
Options
Re:EAP225 outdoor EU upgrade failed
2020-05-11 12:01:11

 

plavielle wrote

What i've done to make all work well : setup security to WPA2-TKIP. Only TKIP make all my device (computer and mobile device) stay connected.

 

Keep in mind that IEEE 802.11n prohibits WiFi rates over 54 Mbps when TKIP is used as an encryption cipher. Consider to set the cipher to »Auto« to allow negotiation of AES for clients supporting this cipher.

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#5
Options

Information

Helpful: 0

Views: 1828

Replies: 4

Related Articles
EAP225 Outdoor V1 Firmware upgrade to 5.1.6 failed
686 0
eap225-outdoor
631 0
EAP225 & EAP225 outdoor connected to Fritzbox
781 0
mesh with EAP225-Outdoor
1339 0
EAP225-outdoor speed
804 0
EAP225 outdoor does not reset
45 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.