VPN bridge

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

VPN bridge

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
VPN bridge
VPN bridge
2020-03-28 10:20:51 - last edited 2020-03-29 11:04:31
Model: EAP225  
Hardware Version: V3
Firmware Version:

I currently am bringing a VPN between two sites with wireguard and raspberry pi boxes similar to https://raspberrypi.stackexchange.com/questions/106176/how-to-bridge-an-access-point-with-a-remote-network-by-wireguard-with-the-use. I want to upgrade the client site to EAP225s. Is there any way to recreate this setup with the EAP controller?

 

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:VPN bridge-Solution
2020-03-28 19:54:52 - last edited 2020-03-29 11:04:31

@pgcudahy, see my HowTo for creating a guest network, it describes how to assign different SSIDs to different subnets (method 2 applies).

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
Recommended Solution
  0  
  0  
#4
Options
3 Reply
Re:VPN bridge
2020-03-28 10:34:52 - last edited 2020-03-28 10:35:57

@pgcudahy, EAPs are just access points, not routers, so no, they don't support wireguard which operates at layer 3 and thus needs routing.

 

You could connect EAPs to your RasPi's subnet used as a VPN. You could even map an additional SSID to this subnet using VLANs. But you cannot terminate the VPN on an EAP.

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#2
Options
Re:VPN bridge
2020-03-28 12:22:40

@R1D2 Is there a good guide anywhere on how to assign separate SSIDs to different subnets?

  0  
  0  
#3
Options
Re:VPN bridge-Solution
2020-03-28 19:54:52 - last edited 2020-03-29 11:04:31

@pgcudahy, see my HowTo for creating a guest network, it describes how to assign different SSIDs to different subnets (method 2 applies).

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
Recommended Solution
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 1219

Replies: 3

Related Articles