ER6020 - Managment of L2TP connection issues.
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi TPlink community!
I have some issues with my L2TP VPN network using ER6020 V2 and R600 V4 routers.
Some times I notice that some users have the IPsec protocol connected but the L2TP does not connect. For such situation i have 2 solutions:
1) Reboot the R600 remote router asking someone at the remote site to turn off and on the router. This solves 80% of the isues.
2) Reboot the ER6020 at the main site. This solves that 20% of times that the iten 1 not solves the problem but disconnect my entire VPN network.
My question is : Is there a way to disconnect a specific IPSec connection at ER-6020 in order to force my remote R600 router to start a new connection? This will avoid to dsconnect the VPN of all other remote sites and (try to ) solve that specific connection issue.
I see that at IPsec SA screen has selection checkboxes but see no action to do with those selected itens.
Best Regards.
MOV
