Help setting up VLAN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Help setting up VLAN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Help setting up VLAN
Help setting up VLAN
2020-04-17 16:31:52
Hardware Version: V4
Firmware Version:

Hello,

 

I need help setting up a basic VLAN in T2600G-28MPS.

I have a Ubiquiti USG 3P in Port 1, that manages all VLAN, and I have 3 EAP's.

I have setup VLAN 70 for Video, and added that VLAN to all ports of swith as TAGGED, on AP's I created an SSID that goes to that VLAN, and when I connect to that SSID I got an IP from that VLAN (192.168.70.xx), all working OK.

Now I want to connect a PC to that VLAN, I connected to Port 2 of the switch, but I was never unable to get an IP from that VLAN, I always get from "main" / VLAN 1. How can I set port 2 as VLAN70 so the PC gets an IP from 192.168.70.xx?

 

I also did not mark Port1 as trunk, is that needed? How can I do that?

 

If someone can guide me on the web gui it would be perfect.

 

Many thanks!

  0      
  0      
#1
Options
2 Reply
Re:Help setting up VLAN
2020-04-20 10:45:07

@JulioSilva 

 

You just need to change the PVID to 70 for the port 2, and set the egress rule as untagged for port2 on VLAN2.

  0  
  0  
#2
Options
Re:Help setting up VLAN
2020-04-20 15:03:49

@JulioSilva Hello, it was that!

Thanks for your help!

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 970

Replies: 2

Related Articles