Hi ,

I am seeking some help trying to setup VLANs on my new TPLINK Router/Switches.

I have drawn a simple topology of what it looks like for now.

I have a Local Domain server with a DHCP server with the SCOPEs as outlined in the image.
I am trying to setup VLAN 10 and 20 with the SCOPEs already setup on the DHCP server however my clients dont seem to receive any ip from the scope, I have a virtual machine running windows 11 that I am testing this senario and whenever I tag VLAN 10 to the HyperV NIC card it gets the random 169.254.X.X address.

Following setup has been done on the Omada cloud for the Wired networks
Wired Networks>LAN
VLAN10 - Configured purpose as VLAN
Application : Gateway and Switches

On both the switches I have enabled the VLAN interface and pointed it to the IP of DHCP relay I have setup on a virtual server using windows server routing and remote access.

I am not sure where I am going wrong or am i missing something. but anything I assing the VLAN tag then basically no IP is assigned.