no clientes after update eap225 to 2.20.0 Build 20200422 Rel. 70513
Hello,
after upgrade to 2.20.0 Build 20200422 Rel. 70513 my 2 eap225 now they dont have any clients assosiated, I have tried rebooting the contorller, rebooting the AP and still no luck
thnks for your help!
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
ok, downgrade directly over OC200 Webinterface works like a charm.
Thanks
Kindly Regards
Ronald
- Copy Link
- Report Inappropriate Content
I have also manually downgraded all our 50 odd EAP225s back to previous firmware and the dynamic data has started displaying back correctly. The controller interface is also not offering the backward un-compatible firmware, which means it may have been pulled off the update servers.
Thanks to TpLink team for resolving this quickly.
- Copy Link
- Report Inappropriate Content
Same issue here.
Also, no release notes.
I guess the release note is: "Breaks statics for software run controller".
I'm downgrading the firmware to 2.5 right now...
- Copy Link
- Report Inappropriate Content
Sorry. Breaks statistics*
- Copy Link
- Report Inappropriate Content
Now the tool shows another firmware version available: 2.7.0 Build 20200113 Rel. 38287
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@rtrevino Sounds about right. I had downgraded to 2.5.0 because that was the available firmware on their website.
I found very interesting that I'm using a firmware that is not available on their site, so I can really check release notes - because Omada controller tells me to check the release notes on the zip file, but the file is nowhere to be found and not available on the website. ¯\_(ツ)_/¯
- Copy Link
- Report Inappropriate Content
I just hit the same issue with the 245. The 245 product page has a firmware from 7/6/20 that requires the new controller software and I didn't realize it before upgrading. Reverted to the previous firmware and all is good. Hopefully the controller software hits soon.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I too accepted the offer to upgrade my EAP225 to the new firmware and saw that the 3.2.1 controller no longer saw the AP. I went to the website and saw a 4.1.5 controller and thought that might be the fix but to install it, I had to first uninstall 3.2.1. I have a backup so I went ahead with the uninstall and installed 4.1.5; still no joy. It might be related to the fact that the new controller wanted me to use a stronger password than the older one but who knows.
I thought I'd go back to 3.2.1 and then downgrade the firmware but the uninstall shortcut doesn't work
Is there a manual way of downgrading the controller?
What is the safe way to then downgrade the AP firmware so that I can use the backup file to restore the network to its working state?
Thanks
P.S.: Controller runs on Windows 10. And at least the network still works even if it cannot be administered
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 6509
Replies: 30
Voters 0
No one has voted for it yet.