TL-SG1016PE - POE with Ceiling Mount AP EAP265 HD AC1750

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-SG1016PE - POE with Ceiling Mount AP EAP265 HD AC1750

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-SG1016PE - POE with Ceiling Mount AP EAP265 HD AC1750
TL-SG1016PE - POE with Ceiling Mount AP EAP265 HD AC1750
2020-10-06 15:45:00 - last edited 2020-10-13 00:39:28
Model: TL-SG1016PE  
Hardware Version: V1
Firmware Version: 1.0.0 Build 20191218 Rel.49932

Hi,

 

My English is so so. My accent is even worse. So please, be indulgent!

 

I try to install 3 VLANs.

 

 

DHCP is set on my modem.

 

Here are my goals:

I want everything to be able to reach Internet.

My modem is on port 16.

 

I want to plug an AC1750 access point on either, port 5 or 14. My goal is to offer Internet to the people using this access point. These people should be able to get Internet, but also to create their own network (for example, if they want to have a Wifi printer, etc.).

 

I tried to plug the AC1750 on port 5 providing the power, either through the switch or through the power supplied with my AC1750. I never was able to get Internet...

 

Important point: if I plug the AC1750 on my modem or on another unmanageable  switch, it works perfectly.

 

Any suggestion to solve this issue?

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:TL-SG1016PE - POE with Ceiling Mount AP EAP265 HD AC1750-Solution
2020-10-12 20:01:43 - last edited 2020-10-13 00:39:28

@Fae 

 

I had already modified the whole settings. Here is how it is now:

 

I'm not sure about what happened because I had modified the setting accordingly 2 days ago. And it was the same mess. Maybe  because I rebooted the device, everything seems to work now. I have access through the access point, and each network is clearly independant...PCs on VLAN 2 can't see what's on VLAN 3 et 4, etc.

Thanks for your help.

Recommended Solution
  0  
  0  
#3
Options
3 Reply
Re:TL-SG1016PE - POE with Ceiling Mount AP EAP265 HD AC1750
2020-10-12 03:44:29

Dear @oxident,

 

 

 

To get the EAP in VLAN2, please set the PVID as 2 accordingly. And please add port 5 in the VLAN 1 for checking.

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#2
Options
Re:TL-SG1016PE - POE with Ceiling Mount AP EAP265 HD AC1750-Solution
2020-10-12 20:01:43 - last edited 2020-10-13 00:39:28

@Fae 

 

I had already modified the whole settings. Here is how it is now:

 

I'm not sure about what happened because I had modified the setting accordingly 2 days ago. And it was the same mess. Maybe  because I rebooted the device, everything seems to work now. I have access through the access point, and each network is clearly independant...PCs on VLAN 2 can't see what's on VLAN 3 et 4, etc.

Thanks for your help.

Recommended Solution
  0  
  0  
#3
Options
Re:TL-SG1016PE - POE with Ceiling Mount AP EAP265 HD AC1750
2020-10-13 00:39:23

Dear @oxident ,

 

Thanks for your help.

 

Welcome~ Glad to hear that it works now. Hope you enjoy the Internet with TP-Link products!

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 844

Replies: 3

Related Articles