OMADA OC200 SNMP problem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

OMADA OC200 SNMP problem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
OMADA OC200 SNMP problem
OMADA OC200 SNMP problem
2021-01-07 09:17:07 - last edited 2021-01-12 09:25:36
Model: OC200  
Hardware Version: V1
Firmware Version: 1.7.3 Build 20201119 Rel.63433

Hi,

 

I am having a problem with setting up SNMP communication.

 

Settings > Services > SNMP > SNMPv1 & SNMPv2c set to ON

 

Community String set.

 

Device does not respond.

 

Tried from my PC with Paessler SNMP Tester. Bad result with SNMP v2:

 

 

Same with SNMP v1:

 

 

It is not a case of firewall. I can test other devices in my network from the same PC. SMTP OC200 does not work also with me monitoring system (checkmk).

 

Will be glad 4 any help

BR
Mikolaj

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:OMADA OC200 SNMP problem-Solution
2021-01-07 23:39:55 - last edited 2021-01-12 09:25:36

@Mikolaj that setting only enables SNMP on switches, routers and AP's not the OC200. If you do an snmpwalk on an EAP or switch IP you should get a response.


Example:

# snmpwalk -v 2c 192.168.0.5 -c public iso.3.6.1.2.1.1.1.0

iso.3.6.1.2.1.1.1.0 = STRING: "Linux EAP245 3.3.8 #1 Fri Sep 18 16:46:11 CST 2020 mips"

 

 

 

 

Recommended Solution
  1  
  1  
#3
Options
3 Reply
Re:OMADA OC200 SNMP problem
2021-01-07 12:19:07

@Mikolaj 

 

Performed the test of OC200 open ports.

 

Result: there are only 3 ports open: 80, 443 and 8088.

 

So SNMP is not open. Additionally I have enabled  SSH on WLC GUI.

 

Port 22 Ii is not open either !

 

Where is the problem ?

  0  
  0  
#2
Options
Re:OMADA OC200 SNMP problem-Solution
2021-01-07 23:39:55 - last edited 2021-01-12 09:25:36

@Mikolaj that setting only enables SNMP on switches, routers and AP's not the OC200. If you do an snmpwalk on an EAP or switch IP you should get a response.


Example:

# snmpwalk -v 2c 192.168.0.5 -c public iso.3.6.1.2.1.1.1.0

iso.3.6.1.2.1.1.1.0 = STRING: "Linux EAP245 3.3.8 #1 Fri Sep 18 16:46:11 CST 2020 mips"

 

 

 

 

Recommended Solution
  1  
  1  
#3
Options
Re:OMADA OC200 SNMP problem
2021-01-08 09:31:23

@Alex 

 

Thx Alex for a reply that is 100% correct ! heart

 

On the other hand this SNMP feature is absolutlly badly described in OIC200 GUI.

 

BR

Mikolaj

  1  
  1  
#4
Options

Information

Helpful: 0

Views: 6771

Replies: 3

Related Articles