Issues after Updating OC200 Firmare

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Issues after Updating OC200 Firmare

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Issues after Updating OC200 Firmare
Issues after Updating OC200 Firmare
2022-01-01 18:26:00
Model: OC200  
Hardware Version: V1
Firmware Version: 1.14.2 Build 20211215 Rel.61111

Hello,

 

After recently updating my OC200 to Controller Version: 5.0.29 / Firmware Version: 1.14.2 Build 20211215 Rel.61111, I am seeing the following three issues:

 

Issue #1

My TL-R605 Router/Gateway now randomly goes offline and comes back online approximately 20-30 seconds later.  This can be more than once daily or every other day, etc.  This was not happening at all previously.

 

Issue #2

It appears that the Automatic Speed Test Interval is no longer functioning with this Firmware - at least it no longer populates the dashboard.  I've had set it at 12 hours for months and it previously ran fine.  I can still manually execute the speed test which populates the dashboard but the automatic testing isn't working.

 

Issue #3

I am getting a lot more Large Ping attacks than I was previously.  I believe they are coming from inside the LAN (i.e., they are not really attacks).  Previously, I was getting these only sporadically - maybe every few days.  Today, for instance, I've been notified of (3) attacks.  On the 28th and 29th of December, I received (6) and (7) respectively.

 

Is anyone else seeing these issues?

(1) TL-R605 v1.0 Router/Gateway (1) OC200 v1.0 Controller (1) TL-SG2210P v3.20 POE Switch (2) TL-SG2218 v1.0 POE Switch (3) EAP245 v3.0 Access Point (1) EAP225-Outdoor v1.0 Access Point
  0      
  0      
#1
Options
4 Reply
Re:Issues after Updating OC200 Firmare
2022-01-01 20:57:13

 

lflorack wrote

Hello,

 

After recently updating my OC200 to Controller Version: 5.0.29 / Firmware Version: 1.14.2 Build 20211215 Rel.61111, I am seeing the following three issues:

 

Issue #1

My TL-R605 Router/Gateway now randomly goes offline and comes back online approximately 20-30 seconds later.  This can be more than once daily or every other day, etc.  This was not happening at all previously.

 

 

@lflorack 

 

Yes. and what i fugure aut is that Switch ACL make a lot off truble in 5.0.29, after removing almost all ACL on switch thing work bether.

 

I also se hardwired device that is online 24/7 connecting  to switch, and very often on wrong switch and port, this happend less after removong Switch ACL

so its somthing strange with switces to. Hardwired device should not roam from switch to switch :-)

 

I have reconect of gateway, switches and access point many many time in short time, I have a case with tp-link on this but they have no answer yet. 

 

 

  0  
  0  
#2
Options
Re:Issues after Updating OC200 Firmare
2022-01-02 03:03:05

@shberge 

 

Thanks!  I'll take a look at my ACL entries.  I think I only have four of them, but will look anyway.

(1) TL-R605 v1.0 Router/Gateway (1) OC200 v1.0 Controller (1) TL-SG2210P v3.20 POE Switch (2) TL-SG2218 v1.0 POE Switch (3) EAP245 v3.0 Access Point (1) EAP225-Outdoor v1.0 Access Point
  0  
  0  
#3
Options
Re:Issues after Updating OC200 Firmare
2022-01-10 07:10:01

Dear @lflorack,

 

lflorack wrote

Issue #1

My TL-R605 Router/Gateway now randomly goes offline and comes back online approximately 20-30 seconds later.  This can be more than once daily or every other day, etc.  This was not happening at all previously.

 

Thank you for your valued feedback!

 

Do you mean that the Router turns into "Disconnected" state and come back as "Connected" every 20-30 seconds on the Devices page?

As @shberge suggested, does it fix the issue after you remove the ACL entries?

 

Please feel free to update here if there is anything new came up. Thank you!

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#4
Options
Re:Issues after Updating OC200 Firmare
2022-01-10 19:42:02

937516

Fae wrote

Dear @lflorack,

 

lflorack wrote

Issue #1

My TL-R605 Router/Gateway now randomly goes offline and comes back online approximately 20-30 seconds later.  This can be more than once daily or every other day, etc.  This was not happening at all previously.

 

Thank you for your valued feedback!

 

Do you mean that the Router turns into "Disconnected" state and come back as "Connected" every 20-30 seconds on the Devices page?

As @shberge suggested, does it fix the issue after you remove the ACL entries?

@Fae 

 

Thank you for your response.

 

Of the (3) issues I listed in my post, Issue #1 (shown in the quote above) regarding the router/gateway is no longer happening.  That issue seemed to disappear 2-3 days after I completed the OC200 firmware update to 5.0.29.  I did not change any of my switch ACL entries.  The other two issues in my original post are continuing as posted:

 

Issue #2

The Automatic Speed Test Interval is no longer functioning with this Firmware - although I can still manually execute the speed test which populates the dashboard.

 

Issue #3

I continue to get more Large Ping attacks than I was previously.  I believe they are coming from inside the LAN (i.e., they are not really attacks).

(1) TL-R605 v1.0 Router/Gateway (1) OC200 v1.0 Controller (1) TL-SG2210P v3.20 POE Switch (2) TL-SG2218 v1.0 POE Switch (3) EAP245 v3.0 Access Point (1) EAP225-Outdoor v1.0 Access Point
  0  
  0  
#5
Options