Need Help. Using VLANS with WAN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Need Help. Using VLANS with WAN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Need Help. Using VLANS with WAN
Need Help. Using VLANS with WAN
2022-01-30 00:54:37
Model: ER605 (TL-R605)  
Hardware Version: V1
Firmware Version: 1.1.1.1

Set up VLAN 30 

Assigned to port on SG2008P with Roku

 

Roku cannot find internet if I do a check network.

 

Quetsion:  Since I have defined VLAN for network port.... Do I also need to set up VLAN for WAN port?

  0      
  0      
#1
Options
3 Reply
Re:Need Help. Using VLANS with WAN
2022-01-31 08:36:16

@jwaltrip Hey

What's your current network topology and VLAN settings ?

  0  
  0  
#2
Options
Re:Need Help. Using VLANS with WAN
2022-01-31 14:29:59 - last edited 2022-01-31 14:32:17

@Yannie Internet --> ER605 --> Switches

 

3 Switches each connected to LAN 1,2,3 ports on ER605

 

Whats working:

I removed and recreated all of the VLANs leaving tings mostly at default.

I defined each VLAN as DHCP server with appropriate DNS and gateway settings.

- Doing this, VLANs seem to be working just fine.

 

What is confusing:

Before I got Omada, I was configuring the ER605 directly.  By Default it assigned a VLAN to the WAN port.  this does not seem to be the case under Omada.  I am trying to figure out why.  Internet does work....

 

there is a setting called "Legal DHCP Servers"

- Do you know what this means?  I assume it meant that if I have DHCP servers, it would allow them to pass through.   this does not seem to be consistent.

 

 

  0  
  0  
#3
Options
Re:Need Help. Using VLANS with WAN
2022-02-01 10:40:38

@jwaltrip 

I am not very sure about the usage of this function, as I have never used it. Controller gives very little explanation.

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 595

Replies: 3

Related Articles