Problems after resetting OC200
I configure OMADA for the first time usign:
- OC200
- Gateway ER7212
- 1 switch SG2218, V1.0 firmware 1.1.2
- 6 AC: 2 EAP225, 2 EAP610, 2 EAP620 HD and 1 EAP225 outdoors
At the beggining al was fine, I was able to adopt and configure everything.
I upgrade everything to the latest firmware. Sudenly, the gateway figured as disconected. I try unplugging, turning off and on, but never get connected again. Then I try to reset it (using the harware button) nothing happens, still shows as disconected. I also reset the switch, but still the same.
Then I decide to forgot it and reset it again. After that it was never showed again in my devices list.
Also when I tried to access using 192.168.0.1 it send me to a blank page, although it redirect me to a page http://192.168.0.1/webpages/login.html but keeps loading forever.
So then I decide to forget and resert the controller. Still the same problem, I don't get the router in the device list and I cannot adopt it. Plus now I can't adopt any of the AC, they said managed by others. I try to adopt them using device account password (both old and new) and not possible. Also I try to reset one the AP using hardware button, but still not able to adopt them.
As you can see it have becoming worse each time I try something. Any ideas on how to proceed? or what can I do to solve this
I was so happy when this was working fine, I have access to everything lots of that, etc. I want to have the controll back!
Anyway, AC still working and I'm able to connect to them and access internet.I just don't have access in the omada controller