Business Community > All Threads > seamless WiFi with eap 245
< All Threads

seamless WiFi with eap 245

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

seamless WiFi with eap 245

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
seamless WiFi with eap 245
seamless WiFi with eap 245
2022-03-10 18:02:42
Model: EAP245  
Hardware Version: V3
Firmware Version:

Dear, there is a thread about the same topic but i need additional clarification if possible. https://community.tp-link.com/en/business/forum/topic/257016

I have a EAP245 and I'd like to buy more EAP245 or a  EAP620 HD V2  to create a seamless WiFi in my house.  I understood I need a OC200. I understood that OC200 and the AP must be connected in the same ethernet line without any additional items in between if not OMADA compliant. is it rigth?

 

I have modem/router (Zyxel ) conneted to the fisrt EAP245 directly and to a switch that distribute furthermore the lan to other equipments and the other EAP245. If I connect the OC200 to this switch ( not Omada - not from TP-LINK).  will I have a seamless WiFi from the 2 Access point mentioned above? If not, how should I do it?

 

Thank you very much 

     

 

 

  0      
 
  0      
 
#1
Options
6 Reply
Re:seamless WiFi with eap 245
2022-03-11 07:44:07

  @Nicola77 

 

Yes it should work fine, you can use any router or switcher you want together with TP-Link EAP

  1  
  1  
#2
Options
Re:seamless WiFi with eap 245
2022-03-11 11:51:16
Thank you. so, even if in between of the 2 AP (2 X EAP245) I have no OMADA compliant router or switches, Omada and the SEAMLESS routing should work fine. (OC200 is required - we said already) When I will have it installed, how can I check it is working? is it enough to see both AP in the OMADA software? Thank you
  0  
  0  
#3
Options
Re:seamless WiFi with eap 245
2022-03-11 11:51:27
Thank you. so, even if in between of the 2 AP (2 X EAP245) I have no OMADA compliant router or switches, Omada and the SEAMLESS routing should work fine. (OC200 is required - we said already) When I will have it installed, how can I check it is working? is it enough to see both AP in the OMADA software? Thank you
  0  
  0  
#4
Options
Re:seamless WiFi with eap 245
2022-03-11 11:59:32

  @Nicola77 

 

You have to enable fast roaming, there is no way to se if this work but other than try. your device have to support 802.11k/v

 

 

  0  
  0  
#5
Options
Re:seamless WiFi with eap 245
2022-03-11 17:50:17

  @Nicola77 

 

Hey

 

Just to jump in here... if roaming is working between the 2x APs (which it should if you enable it).. under LOG  EVENTS you will see roaming happening between the APs as you move around.   Example below

 

  1  
  1  
#6
Options
Re:seamless WiFi with eap 245
2022-03-12 09:32:04
super! thanks!
  0  
  0  
#7
Options

Information

Helpful: 0

Views: 815

Replies: 6

Related Articles
seamless WiFi with eap 245
2403 0
EAP 245
770 0
EAP 245 can't update firmware
1132 0
EAP 245 v3 Firmware 5.0.6
8834 0
Upper 5GHz channels on EAP-245
7864 0
Usage of Mesh and Bridge AP with EAP 245
3863 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.