Business Community > All Threads > ER605 SIP registartion failur
< All Threads

ER605 SIP registartion failur

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

ER605 SIP registartion failur

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
ER605 SIP registartion failur
ER605 SIP registartion failur
2022-05-30 22:51:16 - last edited 2022-05-31 01:01:43
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.0.1 Build 20220223 Rel.68551

Hey Guys,

 

Couple of days ago I replace my exsiting router ( TP-link 1600V) with ER605. Everything is fine except my PBX SIP registration fails. I have contacted the SIP provider and they advised they are not getting any registration attempt at their end. Searchin online, it seems link this was a know issue with TL-ER6020 which very simiilar to ER605

 

https://community.tp-link.com/en/business/forum/topic/41128

 

my set up is as per below:

 

ER605 <--- Internet ---> CISCO UC320W

 

when I replace the ER605 with an old modem, it works just fine. I haev disbaled the SIP ALG as per SIP provider

 

Hope someone can help!

 

Thanks

 

  1      
 
  1      
 
#1
Options
6 Reply
Re:ER605 SIP registartion failur
2022-06-03 08:42:42

  @Sinash 

do you need a port forward?

ScReW yOu gUyS. I aM GOinG hoMe. —————————————————————— For heaven's sake, can you write and describe your issue based on plain fact, common logic and a methodologic approach? Appreciate it.
  0  
  0  
#2
Options
Re:ER605 SIP registartion failur
2022-06-05 02:43:24

  @Sinash Yes mate. I have forwarded all the required ports but still no change. The old carppy modem and a netgear D7000 works seamlesly without needing a port forwarding. I have reporeted the issue to TP-Link and they said below:

 

We suspect that your SIP service uses port 5061, which is not currently supported by ER605 v2.

It will optimize it in the next firmware version.

 

 

The unit is very stable and the GUI has improved a lot. VPN for site-to-site connections also works perfectly.

 

I am hoping they fix the issue soon.

 

 

  0  
  0  
#3
Options
Re:ER605 SIP registartion failur
2022-07-07 01:28:51

  @Sinash 

Hi, could you tell me did the new version works?

  0  
  0  
#4
Options
Re:ER605 SIP registartion failur
2022-07-07 05:43:13

Hey mate,

 

I haven't been given the firmware yet.

 

I let you know soon as I get it.

 

I'll be doing more tests in the next couple of days as per they request,

 

Hopefully the issue can be resolved,

 

Cheers

  0  
  0  
#5
Options
Re:ER605 SIP registartion failur
2022-07-07 12:43:48
IF that doesn't work... Try to disable SIP and H323 ALG. SIP ALG confuses some phones and pbx's.
I can not teach anyone anything - I can only make them think - Socrates
  2  
  2  
#6
Options
Re:ER605 SIP registartion failur
2022-07-14 07:04:24

  @Sinash Hello, I also have the same problem with SIP phone and ipbx in the cloud. But only with WAN determine with a fixed public IP address.Is it the same for you?

  0  
  0  
#7
Options

Information

Helpful: 1

Views: 1794

Replies: 6

Related Articles
ER605 DDNS registration
266 0
SIP-Telefonie 1und1 mittels Gigaset Go am ER605 funktioniert nicht
265 0
ER605
646 0
ER605
485 0
SIP : RTP rampup delay
433 0
No SIP Registration TL-ER6020
1592 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.