Frequent "failed to obtain the IP address for WAN because no response from the server."

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Frequent "failed to obtain the IP address for WAN because no response from the server."

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Frequent "failed to obtain the IP address for WAN because no response from the server."
Frequent "failed to obtain the IP address for WAN because no response from the server."
2022-06-07 12:29:38
Model: ER605 (TL-R605)  
Hardware Version: V1
Firmware Version: 1.2

WAN and WAN/LAN1 each connected to a Netgear M5. WAN's connection to Telstra, WAN/LAN1's connection to Optus.

 

From time to time (at least once a day if not multiple times a day), in particular WAN, connection dropped off like below.

 

Is there something wrong with the router's firmware?

 

242

2022-06-07 21:54:10 DHCP Client NOTICE [osg:**-**-**-**-**-**] failed to obtain the IP address for WAN because no response from the server.
243 2022-06-07 21:54:10 DHCP Client NOTICE

WAN: DHCP client sending DHCP-DISCOVERY timeout.

 

  0      
  0      
#1
Options
1 Reply
Re:Frequent "failed to obtain the IP address for WAN because no response from the server."
2022-06-08 00:12:17 - last edited 2022-06-08 00:13:37

  @SWJRL 

check your phy connection. and it is likely to be a prob with your isp. phone your isp and ask if your line or their server is ok. 

 

to your question, not seems to be a firmware issue. make sure your isp's fine. then you consider something else. router just dials the internet it does not do anything else. 

 

ScReW yOu gUyS. I aM GOinG hoMe. —————————————————————— For heaven's sake, can you write and describe your issue based on plain fact, common logic and a methodologic approach? Appreciate it.
  0  
  0  
#2
Options