ER605 V2 + OC200 DHCP reservation not working too

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

ER605 V2 + OC200 DHCP reservation not working too

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
ER605 V2 + OC200 DHCP reservation not working too
ER605 V2 + OC200 DHCP reservation not working too
2022-07-27 11:59:07 - last edited 2022-08-04 06:41:56
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: Latest 2.0.1

Current setup is:

OC200 Controller

ER605 V2 router running latest 2.0.1 Firmware

3 x EAP225 Outdoor

22 Pieces Tplink Tapo Camera (15 C320WS + 7 C210)

 

As reported with other users of ER605 + Oc200 omada system DHCP reservation is not working and from time to time gives another random ip address to the surveillance cameras installed (22 pieces ALL Tplink wifi ip cameras)

 

I need the dhcp reservation to be not buggy because all my cameras is being recorded by a NVR. So giving a random ip address results in a black screen on the specific camera. Really frustrating. Please tplink give us the enterprise grade reliability that we need. I was really rooting for this all omada network system but this is a big let down :(

  0      
  0      
#1
Options
1 Accepted Solution
Re:ER605 V2 + OC200 DHCP reservation not working too-Solution
2022-07-28 01:55:24 - last edited 2022-08-04 06:41:56

Dear @d0ugmac1, @BryanMania,

 

d0ugmac1 wrote

The Beta fw fixes an issue which was introduced? in the V1 1.2.1 build.  The previous 1.2.0 build did not have this issue...and the build date of 1.2.0 roughly matches the build date (Jan 2022) of V2's 2.0.0 build (bit of a stretch, but something to try now).  If you can downgrade that might be a temp fix while we wait to hear back from @Fae on plans for the V2 firmware?

 

The new Beta firmware provided in this solution post can fix the DHCP Reservation issue on both 1.2.0 (or 2.0.1) and 1.2.1 firmware.

And the beta firmware for ER7206 v1 and ER605 v2 has just been provided, thank you for your attention!

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  2  
  2  
#6
Options
7 Reply
Re:ER605 V2 + OC200 DHCP reservation not working too
2022-07-27 13:21:45

  @BryanMania 

 

Have you tried updating your ER605 to the BETA firmware just posted in this thread?

 

<< Paying it forward, one juicy problem at a time... >>
  0  
  0  
#2
Options
Re:ER605 V2 + OC200 DHCP reservation not working too
2022-07-27 13:27:43

  @d0ugmac1 

 

hi doug. the beta firmware posted is only for ER605 V1 users. mine is an ER605 V2.0

  0  
  0  
#3
Options
Re:ER605 V2 + OC200 DHCP reservation not working too
2022-07-27 15:13:27

  @BryanMania 

 

...and I missed that detail, sorry!

 

The Beta fw fixes an issue which was introduced? in the V1 1.2.1 build.  The previous 1.2.0 build did not have this issue...and the build date of 1.2.0 roughly matches the build date (Jan 2022) of V2's 2.0.0 build (bit of a stretch, but something to try now).  If you can downgrade that might be a temp fix while we wait to hear back from @Fae on plans for the V2 firmware?

<< Paying it forward, one juicy problem at a time... >>
  1  
  1  
#4
Options
Re:ER605 V2 + OC200 DHCP reservation not working too-Solution
2022-07-28 01:55:24 - last edited 2022-08-04 06:41:56

Dear @d0ugmac1, @BryanMania,

 

d0ugmac1 wrote

The Beta fw fixes an issue which was introduced? in the V1 1.2.1 build.  The previous 1.2.0 build did not have this issue...and the build date of 1.2.0 roughly matches the build date (Jan 2022) of V2's 2.0.0 build (bit of a stretch, but something to try now).  If you can downgrade that might be a temp fix while we wait to hear back from @Fae on plans for the V2 firmware?

 

The new Beta firmware provided in this solution post can fix the DHCP Reservation issue on both 1.2.0 (or 2.0.1) and 1.2.1 firmware.

And the beta firmware for ER7206 v1 and ER605 v2 has just been provided, thank you for your attention!

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  2  
  2  
#6
Options
Re:ER605 V2 + OC200 DHCP reservation not working too
2022-07-28 02:04:56

@d0ugmac1 thanks a lot bro

@Fae that beta v2.0 firmware was fast! Trying it now so i can give feedback asap if it solves the dhcp reservation problem. Thank you so much!

  1  
  1  
#7
Options
Re:ER605 V2 + OC200 DHCP reservation not working too
2022-08-01 22:33:33

  @Fae After whole day spent with stubborn IoT devices, which - despite of IP reservations done in Omada controller - got different IPs after AI WiFi optimization, at last I've found this thread and downloaded beta firmware for my ER605 v1. 

Now it works like a charm. Just wanted to thank you :)

  1  
  1  
#8
Options
Re:ER605 V2 + OC200 DHCP reservation not working too
2022-08-02 02:28:41

Dear @maczek

 

maczek wrote

  @Fae After whole day spent with stubborn IoT devices, which - despite of IP reservations done in Omada controller - got different IPs after AI WiFi optimization, at last I've found this thread and downloaded beta firmware for my ER605 v1. 

Now it works like a charm. Just wanted to thank you :)

 

You're welcome, and thank you for your valued feedback.

Glad to hear that your concern was resolved finally, hope you enjoy and have a wonderful day!

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#9
Options

Information

Helpful: 0

Views: 1015

Replies: 7

Related Articles