Business Community > All Threads > PoE LED not lit
< All Threads

PoE LED not lit

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

PoE LED not lit

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
PoE LED not lit
PoE LED not lit
2022-07-28 16:01:33 - last edited 2023-08-22 12:32:43
Model: TL-POE170S  
Hardware Version:
Firmware Version:

I have a Gigabit PoE++ model TL-POE170S. The LED for the PoE output port is not lit. I'm trying to power and connect to an outdoor access point EAP225-Outdoor. I tried switching to a second PoE injector that I know works, but the LED on the working injector also goes off once connected.

 

What could be causing the LED to turn off?

  0      
 
  0      
 
#1
Options
3 Reply
Re:PoE LED not lit
2022-08-02 12:41:48 - last edited 2023-08-22 12:30:56

  @MrChuckles 

 

TL-POE170S and EAP225-Outdoor both support 802.3af/at and are compatible, so normally there is no problem, try different cables to test.

Just striving to develop myself while helping others.
  0  
  0  
#2
Options
Re:PoE LED not lit
2022-08-14 19:16:55 - last edited 2023-08-22 12:30:56

  @MrChuckles 

I had a similar issue with an EAP225 Outdoor and the supplied PoE injector: the injector works with other EAPs, the LED is lit. Connecting the EAP225 Outdoor extinguished the LED on the injector (comes back after unplugging the EAP). No indicator LEDs came on in the EAP225 Outdoor. I ended up returning the EAP for a refund.

  0  
  0  
#3
Options
Re:PoE LED not lit
2022-08-15 08:02:18 - last edited 2023-08-22 12:30:56

Dear @MrChuckles , @Virgo, @EAP2020, 

 

MrChuckles wrote

I have a Gigabit PoE++ model TL-POE170S. The LED for the PoE output port is not lit. I'm trying to power and connect to an outdoor access point EAP225-Outdoor. I tried switching to a second PoE injector that I know works, but the LED on the working injector also goes off once connected.

 

Thanks for taking the time to report the issue to our community! 

 

TL-POE170S is incompatible with EAP225-Outdoor. To power up this EAP, TL-POE160S is recommended to use.

You can see these information on the offical website about Overview of TL-POE170S.

https://www.tp-link.com/business-networking/accessory/tl-poe170s/#overview

 

 

Best Regards!

 

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 977

Replies: 3

Related Articles
POE working but the POE LED dount indicate it
435 0
TL-WA5210G lan led dont lit
2426 0
POE Max LED Flashing Green TL-SG3428XMP and TL-SG3210XHP-M2
3043 0
Poe switch to poe switch
216 0
EAP 225 Outdoor PoE injector Green Blinking LED
782 0
POE Does Not Work
888 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.