POE Does Not Work
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hey folks,
Go easy on me, I've not had this switch for long so it may well be user error.
I have tried to power a couple of devices with POE from this switch, without success. The first being a Unifi AP, which I couldn't get to work, so went back to the POE Injector I got with it. Currently I'm trying to get a Reolink POE Video Doorbell working with it, with little success.
The Reolink is 802.3af compatible, which I believe means it should work perfectly with this switch. The POE Indicator on the front of the switch just flashes green.
Log shows...
| 1 | 2024-02-26 17:26:58 |
PoE |
level_3 |
Power supply status of port 12 changes from on to off. |
| 2 | 2024-02-26 17:26:57 |
PoE |
level_3 |
Power supply status of port 12 changes from off to on. |
| 3 | 2024-02-26 17:26:55 |
PoE |
level_3 |
Power supply status of port 12 changes from on to off. |
| 4 | 2024-02-26 17:26:54 |
PoE |
level_3 |
Power supply status of port 12 changes from off to on. |
| 5 | 2024-02-26 17:26:52 |
PoE |
level_3 |
Power supply status of port 12 changes from on to off. |
| 6 | 2024-02-26 17:26:51 |
PoE |
level_3 |
Power supply status of port 12 changes from off to on. |
| 7 | 2024-02-26 17:26:48 |
PoE |
level_3 |
Power supply status of port 12 changes from on to off. |
| 8 | 2024-02-26 17:26:47 |
PoE |
level_3 |
Power supply status of port 12 changes from off to on. |
And this repeats over and over.
Setting for POE are at default.
Any ideas?
Cheers
