TL-R605 Port Mirror setting via OC200 Controller not found.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-R605 Port Mirror setting via OC200 Controller not found.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-R605 Port Mirror setting via OC200 Controller not found.
TL-R605 Port Mirror setting via OC200 Controller not found.
2022-08-02 15:18:28 - last edited 2022-08-04 07:32:31
Model: ER605 (TL-R605)  
Hardware Version: V1
Firmware Version: V1.2.1

Setup is TLR-605 v1/ firmware v1.21 is managed by OC200 omada controller v1 / latest firmware.

 

I know about this: https://community.tp-link.com/en/business/forum/topic/516972

 

However, in my case, there's no "Ports" tab available for the TL-R605 / ER605, to be found in the Omada Controller interface from OC200.

 

I've checked the manual and it seems to me that port mirroring is available in the router. To quote "The router provides some basic switch port management function, including Statistics, Port Mirror, Rate Control, Port Config and Port Status. Statistics and Rate Control are available only for certain devices."

So my understanding is that it is available.

 

So the case is one of the following:

1) Port mirroring is available but not configurable with OC200.

2) There's really no port mirroring function in the TL-R605.

3) TL-R605 has to be standalone in order to have port mirroring.

 

Unfortunately I do not have the luxury of resetting the router to standalone in order to find out.

 

Would appreciate any information about this. Thank you.

 

 

I intend to analyze traffic coming into the router and finding out where all the LARGE PING and TCP no-flag attacks are coming from. The logs are not really helpful as it does not record and IP addresses.

  0      
  0      
#1
Options
1 Accepted Solution
Re:TL-R605 Port Mirror setting via OC200 Controller not found.-Solution
2022-08-03 08:09:49 - last edited 2022-08-04 07:32:31

  @test_duck 

 

Unfortunately, the answer is Port Mirror function is only available in standalone mode.

Check this: The difference between Standalone mode and Controller mode of Business router

 

 

Just striving to develop myself while helping others.
Recommended Solution
  0  
  0  
#2
Options
3 Reply
Re:TL-R605 Port Mirror setting via OC200 Controller not found.-Solution
2022-08-03 08:09:49 - last edited 2022-08-04 07:32:31

  @test_duck 

 

Unfortunately, the answer is Port Mirror function is only available in standalone mode.

Check this: The difference between Standalone mode and Controller mode of Business router

 

 

Just striving to develop myself while helping others.
Recommended Solution
  0  
  0  
#2
Options
Re:TL-R605 Port Mirror setting via OC200 Controller not found.
2022-08-04 07:32:23

  @Virgo 

 

Thank you!

 

I had wrong assumptions hence I did not even think that there might be a FAQ about it.

  0  
  0  
#3
Options
Re:TL-R605 Port Mirror setting via OC200 Controller not found.
2022-08-04 07:35:43

  @test_duck 

 

FAQ applies to the following hardware models / software:

 

Omada Controller( V5 ) , TL-ER7206 , TL-R605 , ER7206 , Omada Software Controller( V5 ) , ER605 , Omada Cloud-Based Controller( V5 )

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 1044

Replies: 4

Related Articles