Omada v5.4.6 & VLAN config on EAP245

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Omada v5.4.6 & VLAN config on EAP245

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Omada v5.4.6 & VLAN config on EAP245
Omada v5.4.6 & VLAN config on EAP245
2022-09-08 14:55:28 - last edited 2022-09-09 09:18:57
Model: EAP245  
Hardware Version: V3
Firmware Version: 5.0.6

Hello,

I run an Omada Network on a Raspi currently v5.4.6. I have a TL-SG2218 v1.0 (which is the Core) and a TL-SG2210P v3.20 (in my Living Room). I have a handful of EAP245(EU) v3.0. I have got the network segmented with VLANS and several SSID's connected to those VLANS.

 

My question is this. One of the EAP's has a PC connected to the secondary NIC built into the EAP This provides wired access for the PC. I want to force this port to be on a particular VLAN only. The VLAN is already established on the EAP. How can I do this?

 

Thank you
 

  1      
  1      
#1
Options
1 Accepted Solution
Re:Omada v5.4.6 & VLAN config on EAP245-Solution
2022-09-09 07:50:57 - last edited 2022-09-09 09:18:57

  @Stoneditch 

 

The EAP245 can not set the VLAN ID for the port, i.e. there is no way to hit the PVID, if you are using a WALL series product, you can make the relevant settings.

Just striving to develop myself while helping others.
Recommended Solution
  0  
  0  
#2
Options
2 Reply
Re:Omada v5.4.6 & VLAN config on EAP245-Solution
2022-09-09 07:50:57 - last edited 2022-09-09 09:18:57

  @Stoneditch 

 

The EAP245 can not set the VLAN ID for the port, i.e. there is no way to hit the PVID, if you are using a WALL series product, you can make the relevant settings.

Just striving to develop myself while helping others.
Recommended Solution
  0  
  0  
#2
Options
Re:Omada v5.4.6 & VLAN config on EAP245
2022-09-09 09:18:49

  @Virgo Thanks for the reply. 

That's a bit disappointing. Since this functionality is available in the Wall series can I request that this be added to the EAP's. I can't be the only person who would benefit from this. 

Happy to run Beta software/firmware to test this out.

 

Thank you

  3  
  3  
#3
Options

Information

Helpful: 1

Views: 593

Replies: 2

Related Articles