Inter VLAN connectivity issue. Not able to access vlan1 ip from vlan10,vlan20,vlan40
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi Team,
Router: ER7206
Switch: T1600G-28PS v3.0
controller: OC200
VLANs:
1. VLAN1 - 192.168.1.0/24
2. VLAN10 - 192.168.10.0/24
3. VLAN20 - 192.168.20.0/24
4. VLAN40 - 192.168.40.0/24
PC: 192.168.1.100
proxmox: 192.168.1.110
NAS: 192.168.1.120
VMs on proxmox:
vm1: 192.168.20.11
vm2: 192.168.20.12
vm2: 192.168.20.13
I have created above all VLANs on the Omada controller. I'm trying to do inter-VLAN connectivity. I'm able to communicate from the default VLAN (VLAN 1) to all VLANs. but from other vlan10,20,30 I'm not able to access the devices that are in vlan1.
Scenario: I have proxmox connected in VLAN 1 and VMS is running on proxmox having IPs from vlan 20. I'm able to access the vm1,vm2 and vm3 from pc however i'm not even ping the pc ip from vm1.vm2 and vm3.
This is the same with all other VLANs (vlan10 and vlan40)
