I have successfully set up my OC200 with an ER605 Router, JetStream Switch, and an EAP 610.  Everything works.

Ideally, I would like to power my OC200 with PoE only, but for whatever reason, I need to have it connected to USB power and the second Ethernet port to get an IP address from the router.

What am I doing wrong?  The controller is connected to the first PoE+ port on the JetStream switch. Am I just being impatient as it takes its time to start up?

I know it takes 3-4 minutes, per the landing page on the controller, to log into it locally once the IP address is acquired.

Thanks in advance for any ideas!