Omada ER605 Client PC IP Address

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Omada ER605 Client PC IP Address

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Omada ER605 Client PC IP Address
Omada ER605 Client PC IP Address
2022-11-01 06:59:46
Model: ER605 (TL-R605)  
Hardware Version: V1
Firmware Version:

I got a network setup:

Issue is, can I set a static IP to the client pcs given by the controller?

For example, if the pc is in DHCP/Dynamic, and it got an IP of 192.168.0.100 , can I set it as static IP in control panel > IPV4 by having config of 192.168.0.100 | 255.255.255.0 |192.168.0.1 |?

It provides internet but the fact that I want my client pcs to have specific ip.

I am worried that omada contoller will change its client pc's ip because it sets to the client pc as auto obtain

Anyone can clarify

  0      
  0      
#1
Options
2 Reply
Re:Omada ER605 Client PC IP Address
2022-11-02 10:46:16

  @Engineer_Cenina 

 

If your PC set up static IP on control panel, means your PC is not using DHCP anymore.

 

The router can only affect the PC using DHCP.

  0  
  0  
#2
Options
Re:Omada ER605 Client PC IP Address
2022-12-01 13:48:53

  Got same issues. I have CCTVs (TAPO c210) connected on my OMADA network with VIGI NVR. The issue is when there is a system reboot/power interuptions, some or all of the cctvs changes IP addresses so the NVR can no longer auto-obtain the device. How can I effectively and forcefully assign IP addresses on my CCTVs so it would not randomly change IPs during reboot? I already tried it in the Omada controller accessing CLIENT settings. 

  0  
  0  
#3
Options