IP Address Pooling with Omada OC200

IP Address Pooling with Omada OC200

IP Address Pooling with Omada OC200
IP Address Pooling with Omada OC200
2 weeks ago - last edited 2 weeks ago
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.2.6

Why is it when we use 10.0.0.1 with a subnet mask of 255.0.0.0 and yet we can only use 254 IP Addresses? Should it be more than that? I am also willing to learn. Thank you!

  0      
  0      
#1
Options
1 Accepted Solution
Re:IP Address Pooling with Omada OC200-Solution
2 weeks ago - last edited 2 weeks ago

Hi @PISD 

Thanks for posting in our business forum.

This model only supports 1024 DHCP IPs.

ER8411 is 4096 for your reference.

Besides that, this product is designed for 60-80 devices. If you need at least 200 devices, consider ER8411. 100-200, ER7206.

 

If you need one and a half million IPs, I think you should consider getting a server instead of any of the pre-built routers. Or consider a L3 switch as the core switch and hosting the DHCP server.

 

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#4
Options
5 Reply
Re:IP Address Pooling with Omada OC200
2 weeks ago

  @PISD ,

 

ER605 can make local network for 500 ip? - Business Community (tp-link.com)

 

Somehow, ER605s seem to have a DHCP hard limit around 250, regardless of the network size...

 

 

 

 

  1  
  1  
#2
Options
Re:IP Address Pooling with Omada OC200
2 weeks ago

Hi @EricPerl 

Thanks for posting in our business forum.

Please kindly stop spreading the misinformation. The link you linked has a reply from FAE. The limit is 1024 for DHCP clients.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#3
Options
Re:IP Address Pooling with Omada OC200-Solution
2 weeks ago - last edited 2 weeks ago

Hi @PISD 

Thanks for posting in our business forum.

This model only supports 1024 DHCP IPs.

ER8411 is 4096 for your reference.

Besides that, this product is designed for 60-80 devices. If you need at least 200 devices, consider ER8411. 100-200, ER7206.

 

If you need one and a half million IPs, I think you should consider getting a server instead of any of the pre-built routers. Or consider a L3 switch as the core switch and hosting the DHCP server.

 

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#4
Options
Re:IP Address Pooling with Omada OC200
2 weeks ago - last edited 2 weeks ago

  @Clive_A ,

 

Well, the OP in this thread and the OP in the linked thread both failed to get past ~250.

 

In my reply #9 on the linked thread, I mentioned another thread I had found with that reply from Fae.

> That's a reply from staff... the limit was 1024 on the v1. I'd be surprised it was brought down on v2 (which is more capable in many ways).

> I realize it's about reservations but I'm not entirely sure how it would make sense if the server could not handle as many leases.

 

And then on #10, you jump in, upsell 2 models up and never bother to help the OP, as if it was expected behavior.

But, fine. I'm done. I'm also done buying your products.

  1  
  1  
#5
Options
Re:IP Address Pooling with Omada OC200
2 weeks ago - last edited 2 weeks ago

Hi @EricPerl 

Thanks for posting in our business forum.

EricPerl wrote

  @Clive_A ,

 

Well, the OP in this thread and the OP in the linked thread both failed to get past ~250.

 

In my reply #9 on the linked thread, I mentioned another thread I had found with that reply from Fae.

> That's a reply from staff... the limit was 1024 on the v1. I'd be surprised it was brought down on v2 (which is more capable in many ways).

> I realize it's about reservations but I'm not entirely sure how it would make sense if the server could not handle as many leases.

 

And then on #10, you jump in, upsell 2 models up and never bother to help the OP, as if it was expected behavior.

But, fine. I'm done. I'm also done buying your products.

And even for the managed L3 switch, SG6000 series we have, the IP available limit is 8,000. If you build a server with dual slots Threadripper or Xeon, you are likely to host a DHCP server that can allocate more IPs because simple as that the CPU on the pre-built router/switch is way less powerful than servers. 

 

If the network is like what he described which needs a /8, I am afraid that we don't have a product that can do it. Creating a subnet that large also generates tons of ARP and -cast issues.

Even if there is a product is advertised to meet 1 million or 8,000 IPs, it does not mean it can make all 8,000 clients get full speed. You have some misunderstanding in the product.

 

I also explained that the recommended device number, sessions, and IP are relevant but you need to weigh from all aspects.

You mentioned that the DHCP server only supports 250 or so. No, that's not the correct description. This value should be referring to the DHCP IP limit. Unless you are referring to the recommended device number.

 

The link, if he has a problem with existing and actually connected 100 or 200 devices, that have already broken the limit of the product and bear this in mind. If he experiences a problem, that's expected and he knew from a friend that the model cannot carry that many devices. What do you suggest other than upgrading the product to address his problem?

The pool is configured fine. DHCP limit is not reached yet. He only faced the threshold of the recommended devices. Why not consider if that's the reason for the rest of the devices failing to get IP addresses?

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  1  
  1  
#6
Options