ER8411 and OpenVPN/SSL VPN Bug report.
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
@Fae or somebody from TP-LINK
OpenVPN/SSL VPN not working.
OpenVPN Client connects server but no data goes through
OpenVPN Server does not work, gets connected but no data. this also destroys Site to Site VPN communication, the same happens with SSL VPN
so I still have to use my old ER605v2 next to it for OpenVPN communication..
site to site and L2TP client with policy routing actually work surprisingly well, it seems that OpenVPN is the problem.
this occur in software version 1.0.0 and 1.0.1
the router is also missing all the functions that came in controller 5.6
short about VPN configuration
7 Site to Site VPN SHA2 - AES256 - DH14/ESP - SHA2 - AES256 + PFS DH5
1 L2TP Client with Policy route.
and I want 1 OpenVPN Client to a OpenVPN Server, this run now on ER605v2 because this don't work on ER8411
I also cannot connect with L2TP client to Unifi UDM or UDM Pro, I have tried against 3-4 sites with the same result, and again I have to use ER605v2 for this job.
L2TP work with ER8411 against Unifi USG 3P and USG Pro but not UDM, (ER605v2 working well to both)
EDIT:
this is probably a good thing. I had to enable Require MS-CHAP v2 on UDM to make it work on the ER8411
so hopefully this is because the ER8411 is safer :-)
With the ER605v2, this setting does not need to be on.
