Can't See SSID - EAP610-Outdoor
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.Can't See SSID - EAP610-Outdoor
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
The SSID does not seem to be broadcasting. I'n operating in EAP standalone mode and I can see the EAP in the App and on the web, but can not see the SSID on my iPhone or Computer. I have tried to do a factory reset and cannot see the default SSID prior to setting up my own SSID. I have ensured the broadcast is enabled. I've uninstalled it and plugged directly into the switch and I am within arms length away (to rule out any distance issues). I have tried without Security. I have tried manual channel. I have tried various wireless modes. I have tried 2.4GHz only. I have tried to turn off the SSID broadcast and manually enter SSID from phone and computer.
I have tried directly into POE switch and also witht he inkector.
Portal Disabled
VLAN Disabled
Guest Net Diabled.
Am I missing something? My only conclusion is it's faulty.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @Sobereye, @Jmorik , @GinoB , @Nigel_Tuffnel11,
Thanks for reporting this issue to the TP-Link community.
This issue seems like a hardware issue, if you need any further assistance with these products, please feel free to submit a ticket email to our technical support team for help from here.
- Copy Link
- Report Inappropriate Content
If you have an android device, try something like WiFi analyser to see if its "hidden" or something
Also post a pic of your config here and we can look to see if anything is strange for you.
It may well just be a fautly device (sadly!
- Copy Link
- Report Inappropriate Content
lazydrone wrote
The SSID does not seem to be broadcasting. I'n operating in EAP standalone mode and I can see the EAP in the App and on the web, but can not see the SSID on my iPhone or Computer. I have tried to do a factory reset and cannot see the default SSID prior to setting up my own SSID. I have ensured the broadcast is enabled. I've uninstalled it and plugged directly into the switch and I am within arms length away (to rule out any distance issues). I have tried without Security. I have tried manual channel. I have tried various wireless modes. I have tried 2.4GHz only. I have tried to turn off the SSID broadcast and manually enter SSID from phone and computer.
I have tried directly into POE switch and also witht he inkector.
Portal Disabled
VLAN DisabledGuest Net Diabled.
Am I missing something? My only conclusion is it's faulty.
Dear @lazydrone
To better assist you, I've created a support ticket via your registered email address, and escalated it to our support engineer to look into the issue.
The ticket ID is TKID221210559, please check your email box and ensure the support email is well received. Thanks!
- Copy Link
- Report Inappropriate Content
Hi @Hank21
I am encountering the same issue with my EAP610-Outdoor.
Did you managed to find the solution for this?
I have seen a lot of the this complaint relative to this AP.
- Copy Link
- Report Inappropriate Content
@Ric04jan72 I determined it was defective and returned it. Got a new one and it is working fine. Have had no issues.
- Copy Link
- Report Inappropriate Content
Hello @Ric04jan72 ,
Ric04jan72 wrote
I am encountering the same issue with my EAP610-Outdoor.Did you managed to find the solution for this?
I have seen a lot of the this complaint relative to this AP.
Thank you so much for taking the time to post the issue on TP-Link community!
To better assist you, I've created a support ticket via your registered email address, and escalated it to our support engineer to look into the issue. The ticket ID is TKID230332822, please check your email box and ensure the support email is well received. Thanks!
Once the issue is addressed or resolved, welcome to update this topic thread with your solution to help others who may encounter the same issue as you did.
Many thanks for your great cooperation and patience!
- Copy Link
- Report Inappropriate Content
@lazydrone Having same issue with my EAP610-indoor v2.0. the controller detect my AP but will not broadcast SSID.
- Copy Link
- Report Inappropriate Content
I'm having the same issue. Has anyone had this resolved, aside from returning the unit?
- Copy Link
- Report Inappropriate Content
@Hank21 Also encountering same issue, I have 11 EAP610 and 4 of these have this kind of problem. Hope you will solve this issue as soon as possible.
- Copy Link
- Report Inappropriate Content
I have the same issue eap610 outd
- Copy Link
- Report Inappropriate Content
@Nigel_Tuffnel11 The SSID does not seem to be broadcasting. I'n operating in EAP standalone mode and I can see the EAP in the App and on the web, but can not see the SSID on my iPhone or Computer. I have ensured the broadcast is enabled. I've uninstalled it and plugged directly into the switch and I am within arms length away (to rule out any distance issues). I have tried without Security. I have tried manual channel. I have tried various wireless modes. I have tried 2.4GHz only. I have tried to turn off the SSID broadcast and manually enter SSID from phone and computer.
I have tried directly into POE switch.
can I get an RA amen
- Copy Link
- Report Inappropriate Content
Information
Helpful: 5
Views: 3231
Replies: 16
Voters 0
No one has voted for it yet.