IKEv2 Full Tunnel Support

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

IKEv2 Full Tunnel Support

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
IKEv2 Full Tunnel Support
IKEv2 Full Tunnel Support
2023-01-12 16:50:12 - last edited 2023-02-01 11:48:23
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.0.1

Hi,

 

After configuring my ER-605 for Client-to-LAN tunneling with IKEv2, I realized is not fully tunneling all traffic, only "local" LAN traffic, no WAN (Internet traffic).

 

Is there any way to full tunnel all information to remote WAN and not to the local gateway?

The same config with L2TP/IPSEC works fine, the problem is new Android devices do not support L2TP/IPSEC protocol.

 

OpenVPN is in same way, only local traffic no full tunnel.

 

By the way, will be great indeed to have user/password authentication options for IKEv2 like LT2P (not only preshared key and identifier).
 

Thanks,

  1      
  1      
#1
Options
1 Accepted Solution
Re:IKEv2 Full Tunnel Support-Solution
2023-02-01 10:27:03 - last edited 2023-02-01 11:48:23

ObiWanKenobi wrote

  @HelsingL In Europe the last version is this one:

 

https://www.tp-link.com/es/support/download/er605/#Firmware

 

ER605(UN)_V2_2.0.1 Build 20220223

 

Still not showing version 2.1.1

 

 

Dear  @ObiWanKenobi 

 

Subscribe the following post to get the newest firmware notification for your Omada router :)

Current ER605 / ER7206 / ER8411 Firmware Releases - [Constantly Updated]

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  0  
  0  
#9
Options
10 Reply
Re:IKEv2 Full Tunnel Support
2023-02-01 09:23:13

  @ObiWanKenobi I remember they have released a firmware recently which supports OpenVPN full mode.  I forget the version number

  0  
  0  
#2
Options
Re:IKEv2 Full Tunnel Support
2023-02-01 09:28:55

  @HelsingL I'm running the latest firmware for V2, and there is no full tunnel option for OpenVPN

 

Thanks,

  0  
  0  
#3
Options
Re:IKEv2 Full Tunnel Support
2023-02-01 09:53:23

  @ObiWanKenobi Check this Release Note >

 

Controller_v5.8.4  +  ER605(UN)_V2_2.1.1 Build 20230115

  0  
  0  
#4
Options
Re:IKEv2 Full Tunnel Support
2023-02-01 09:58:48

  @ObiWanKenobi  in Standalone

  0  
  0  
#5
Options
Re:IKEv2 Full Tunnel Support
2023-02-01 10:01:19

  @HelsingL In Europe the last version is this one:

 

https://www.tp-link.com/es/support/download/er605/#Firmware

 

ER605(UN)_V2_2.0.1 Build 20220223

 

Still not showing version 2.1.1

 

 

  0  
  0  
#6
Options
Re:IKEv2 Full Tunnel Support
2023-02-01 10:06:14

  @ObiWanKenobi Go to TP-Link's official website to download and learn much. This is my way, I think it more convenientlaugh

 

https://www.tp-link.com/en/support/download/er605/#Firmware

 

Good luck to you~

  0  
  0  
#7
Options
Re:IKEv2 Full Tunnel Support
2023-02-01 10:08:50

  @HelsingL Thanks for the link with new firmware!!!!

  0  
  0  
#8
Options
Re:IKEv2 Full Tunnel Support-Solution
2023-02-01 10:27:03 - last edited 2023-02-01 11:48:23

ObiWanKenobi wrote

  @HelsingL In Europe the last version is this one:

 

https://www.tp-link.com/es/support/download/er605/#Firmware

 

ER605(UN)_V2_2.0.1 Build 20220223

 

Still not showing version 2.1.1

 

 

Dear  @ObiWanKenobi 

 

Subscribe the following post to get the newest firmware notification for your Omada router :)

Current ER605 / ER7206 / ER8411 Firmware Releases - [Constantly Updated]

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  0  
  0  
#9
Options
Re:IKEv2 Full Tunnel Support
2023-02-02 07:00:42

  @ObiWanKenobi lol...welcome to the circus.  We've all been asking for this pretty basic feature for a year now and they dance around it.  At first they added features like Facebook wifi when nobody asked for it and now they just ignore the question.  Omada is supposed to be a "business" solution yet it doesn't do what a $50 router from any other company can.  I've just about given up hope and I'm considering tearing all of this out at this point.

 

Oh, wait for the promise of new firmware coming out in the next month or so, we did that back in October and it still hasn't happened with no further release date mentioned (because they flat out dodge the question).  Other consumer TP-Link products can do this but apparently the "business" class stuff is just too hard.

 

 

  0  
  0  
#10
Options
Re:IKEv2 Full Tunnel Support
2023-02-02 08:44:14

  @unhappycust0mer The firmware 2.1.1 is working pretty well (full OpenVPN tunnel + Wireward + DDNSSEC...), I'm running it in standalone mode with no issues so far.

The device is about 65 € in Amazon, IMO is more than a good quality-price relation.

 

 

 

  0  
  0  
#11
Options

Information

Helpful: 1

Views: 1303

Replies: 10

Related Articles