Migrating Omada Software Controller 5.1.7 to Omada OC200 5.6.4

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Migrating Omada Software Controller 5.1.7 to Omada OC200 5.6.4

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Migrating Omada Software Controller 5.1.7 to Omada OC200 5.6.4
Migrating Omada Software Controller 5.1.7 to Omada OC200 5.6.4
2023-01-27 10:22:19
Tags: #Controller Installation #Controller Migration
Model: OC200  
Hardware Version: V2
Firmware Version: 2.6.1

Hi,

I am currently running the Omada Software Controller (Linux) in a Docker container. This is at version 5.1.7.

Now I have bought an OC200 hardware controller which is at a higher version 5.6.4.

Can I migrate settings and data from the software controller to the hardware controller by means of the "Controller Migration" option and/or the backup/restore option?

Thanks

  0      
  0      
#1
Options
5 Reply
Re:Migrating Omada Software Controller 5.1.7 to Omada OC200 5.6.4
2023-01-28 21:56:35
You must use the Site Migration option.
<< Paying it forward, one juicy problem at a time... >>
  0  
  0  
#2
Options
Re:Migrating Omada Software Controller 5.1.7 to Omada OC200 5.6.4
2023-01-30 07:12:04

  @MauriceGee 

 

Both can work. If you use Backup/Restore, you just need to re-adopt the oamda devices via the username/password.

  0  
  0  
#3
Options
Re:Migrating Omada Software Controller 5.1.7 to Omada OC200 5.6.4
2023-01-31 14:37:08

  @Somnus, I have a similar need but the info displayed in the Controller Migration screen of the Omada Software controller says the following:

 "Controller Migration allows Omada administrators to migrate your configurations and data from the current controller to any other controller that has the same version"

 

I am running Omada_SDN_Controller_V5.5.6_Windows which can be upgraded to any of the following:

Omada_SDN_Controller_V5.6.3_Windows
Omada_SDN_Controller_V5.7.4_Windows
Omada_SDN_Controller_v5.8.4_Windows
 

Latest OC200 V1 firmware can run:


Built-in Omada SDN Controller v5.7.6
Built-in Omada SDN Controller v5.6.4
Built-in Omada SDN Controller v5.4.7

 

So it appears there is no perfect version match SW vs HW controller

 

Anyone able to suggest a safe upgrade path to use HW controller ?

 

 

  0  
  0  
#4
Options
Re:Migrating Omada Software Controller 5.1.7 to Omada OC200 5.6.4
2023-01-31 16:45:20 - last edited 2023-01-31 16:46:23

I can confirm this is an issue, I have a production OC200 running v5.6.4 and I was unable to import that backup config file into a software controller (both were @mbentley docker builds) running either v.5.8.4 or v.5.6.3. I had always thought only the first two digits mattered (ie 5.8 vs 5.6) but in both situations and with multiple attempts an 'unspecified error' occurred and it suggested I try again later... I gave up.

<< Paying it forward, one juicy problem at a time... >>
  0  
  0  
#5
Options
Re:Migrating Omada Software Controller 5.1.7 to Omada OC200 5.6.4
2023-01-31 17:29:27

  @MauriceGee 

 

Ok, just successful in a software->software (Linux) migration from a docker image running 5.4.6 to one running 5.8.4. 

 

Need to understand why my OC200_5.6.4->docker_5.8.4 didn't work as technically they are both Linux behind the scenes.

<< Paying it forward, one juicy problem at a time... >>
  0  
  0  
#6
Options

Information

Helpful: 0

Views: 881

Replies: 5

Tags

Controller Installation
Controller Migration
Related Articles