Too many preconfigured devices

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

Too many preconfigured devices

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Too many preconfigured devices
Too many preconfigured devices
2023-02-05 22:19:38 - last edited 2023-04-03 10:19:53
Model: ER605 (TL-R605)  
Hardware Version: V1
Firmware Version: 1.2.1 Build 20220512 Rel.76748

When adopting my 

ER605(UN) v1.6

 

and

TL-SG2210P(UN) v3.26

 

I am rcv. this msg.

"Too many preconfigured devices....'

 

What is a work around for this?

 

Thanks,

Chris.

 

  0      
  0      
#1
Options
2 Accepted Solutions
Re:Too many preconfigured devices-Solution
2023-02-28 01:04:01 - last edited 2023-04-03 10:19:53

Hello @Nuxmedia 

 

Nuxmedia wrote

  @Fae To add EAP225 to Omada cloud controller error "Too many PRECONFIGURED devices in this account. Available licenses are not enough." is obtained.

This controller haven't any AP adopted before

 

It seems that you don't have available licenses to add the device. For management and configurations on the Omada Cloud-Based Controller, each device should be bound with an activated license. You can login the Omada Cloud website with your TP-Link ID account, and purchase licenses for your Omada devices.

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  0  
  0  
#4
Options
Re:Too many preconfigured devices-Solution
2023-12-06 02:49:26 - last edited 2023-12-07 01:13:50

 Hello @Everyone,  I encountered the same error, only fix is to add your newly purchased license to your controller in https://omada.tplinkcloud.com/#licenseManagement. You can adopt the EAP without issue once you add the license. 

Recommended Solution
  0  
  0  
#10
Options
15 Reply
Re:Too many preconfigured devices
2023-02-07 03:11:21 - last edited 2023-02-07 03:12:14

Dear @SysopChris,

 

Are you using software controller or hardware controller OC200/OC300, what's the version of your controller?

How many Omada devices are adopted by the controller before you adopt the two devices?

If possible, could you please upload a image of the error "Too many preconfigured devices....'?

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#2
Options
Re:Too many preconfigured devices
2023-02-27 17:38:04

  @Fae To add EAP225 to Omada cloud controller error "Too many PRECONFIGURED devices in this account. Available licenses are not enough." is obtained.

This controller haven't any AP adopted before

  0  
  0  
#3
Options
Re:Too many preconfigured devices-Solution
2023-02-28 01:04:01 - last edited 2023-04-03 10:19:53

Hello @Nuxmedia 

 

Nuxmedia wrote

  @Fae To add EAP225 to Omada cloud controller error "Too many PRECONFIGURED devices in this account. Available licenses are not enough." is obtained.

This controller haven't any AP adopted before

 

It seems that you don't have available licenses to add the device. For management and configurations on the Omada Cloud-Based Controller, each device should be bound with an activated license. You can login the Omada Cloud website with your TP-Link ID account, and purchase licenses for your Omada devices.

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  0  
  0  
#4
Options
Re:Too many preconfigured devices
2023-04-27 22:43:45

  @Fae No EAP's are configurated in Omada Controller. I'm trying to adopt the only one

  0  
  0  
#5
Options
Re:Too many preconfigured devices
2023-05-30 00:28:00

  @SysopChris 

 

Too many PRECONFIGURED devices in this account. Available licenses are not enough. please help cloud omada

 

Thank You!

  0  
  0  
#6
Options
Re:Too many preconfigured devices
2023-10-18 16:41:27

  @SysopChris 

 

Hello,

 

I am tryiong top configure the EAP 610 outdoor as a main AP (connected to my rooter) and the EAP225 outdoor as a mesh (wireless) but I cannot have them connected and working. 

 

 

When I try to add the EAP 610 clicking on add devices on the omada website typing manually the S/N, the following message appears: 

 

 

Could you please provide some help?

 

Thanks a lot.

  6  
  6  
#7
Options
Re:Too many preconfigured devices
2023-10-19 05:39:34

  @RVCD 

have you checked the prerequisites for the cloud based omada? https://www.tp-link.com/en/support/faq/3365/

do you have avail licenses?

ScReW yOu gUyS. I aM GOinG hoMe. —————————————————————— For heaven's sake, can you write and describe your issue based on plain fact, common logic and a methodologic approach? Appreciate it.
  2  
  2  
#8
Options
Re:Too many preconfigured devices
2023-10-31 20:43:06

  @RVCD I had similar issue. all you need to do first is check if you have assign your licence to the controller which you created ( am assuming a cloud controller). Then after try to add the device to the controller.

 

Note: you might have bought the licence but you have not assign it to controller.

  0  
  0  
#9
Options
Re:Too many preconfigured devices-Solution
2023-12-06 02:49:26 - last edited 2023-12-07 01:13:50

 Hello @Everyone,  I encountered the same error, only fix is to add your newly purchased license to your controller in https://omada.tplinkcloud.com/#licenseManagement. You can adopt the EAP without issue once you add the license. 

Recommended Solution
  0  
  0  
#10
Options
Re:Too many preconfigured devices
2024-01-28 20:27:22

  @Fae It seems we are crazy! We are still using their products after such negligence, I boycott you from today. How many companies are there who don't have to pay a license fee to run the device. And we license agree for license fee, Even if you want to pay, you have to face such problems.😡😡😡😡😡

  1  
  1  
#11
Options

Information

Helpful: 0

Views: 13007

Replies: 15

Related Articles