ER8411 not showing on main dashboard on OC300
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
ER8411 shows in the device tab & map but not the main dashboard. No gateway utilization, No internet capacity. As I read in other threads there is NO "periodic speed test option" under site
ER8411v1
OC300
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
If memory serves me right they removed the auto speed test a while back, basically because it was mis-reading the WAN speeds constantly. Now you need to set the WAN speed yourself using EDIT button beside NO INTERNET CAPACITY
Once you have the speeds set manually (900 / 500 or 80 / 10 ) etc etc.. then it should show you gateway utilisation as it knows how much capacity you have
At the moment it wont show as it doesnt know your line speed to give you a percentage..
Hope that helps!
- Copy Link
- Report Inappropriate Content
@omadaistheissue
YOU MUST HIT THE BOX WITH THE PENCIL BESIDE NO INTERNET CAPACITY !!!!! THEN ENTER YOUR INTERNET INFO FOR IT TO WORK!!!!
- Copy Link
- Report Inappropriate Content
If memory serves me right they removed the auto speed test a while back, basically because it was mis-reading the WAN speeds constantly. Now you need to set the WAN speed yourself using EDIT button beside NO INTERNET CAPACITY
Once you have the speeds set manually (900 / 500 or 80 / 10 ) etc etc.. then it should show you gateway utilisation as it knows how much capacity you have
At the moment it wont show as it doesnt know your line speed to give you a percentage..
Hope that helps!
- Copy Link
- Report Inappropriate Content
@omadaistheissue
YOU MUST HIT THE BOX WITH THE PENCIL BESIDE NO INTERNET CAPACITY !!!!! THEN ENTER YOUR INTERNET INFO FOR IT TO WORK!!!!
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 473
Replies: 2
Voters 0
No one has voted for it yet.