AI WLAN Optimization fails after 20m11s without feedback information
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.AI WLAN Optimization fails after 20m11s without feedback information
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
When running AI WLAN optimization, it takes a while to scan all channels. I leave the browser window open.
After 20 minutes I see the process has ended, with no notification. The "Last 10 Scan Results" are shows "No Data" and in the tab "Optimization Log" a failure is printed.
I repeated the test on another day and both times it fails at 20m11s, listing Scan Result "Failed" and no feedback.
What should I expect here?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Finally I received the official update notification for my ER605 and OC200 after which AI WLAN optimisation works as expected. No early installation or beta version needed.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Sure, I am operating a TL-SG2008P with three EAPs on PoE:
Model EAP-245 (EU)
hardware version v3
firmware version: 5.0.6 build 20220429 rel 44315
- Copy Link
- Report Inappropriate Content
Hello @MvdB,
Please upgrade the EAP245 V3 firmware version to the latest one EAP245(EU)_V3_5.1.0 Build 20230104.
Please also confirm the controller is also the latest firmware version V5.9.
You may upgrade them and test them again
- Copy Link
- Report Inappropriate Content
My OC200 v1 is still running on firmware 5.7.6 and waiting for 5.9 to be released.
No updates can be found for the router, switch and EAPs (because I'm still at 5.7, I assume?)
Any way to move on or should I wait for 5.9 to become available? No interest in running beta firmware.
- Copy Link
- Report Inappropriate Content
Hello @MvdB,
A newer 5.9.32 official firmware has been released, please follow the post link below for details.
Omada Hardware Controller_V5.9.32 (Released On Apr 14th, 2023)
- Copy Link
- Report Inappropriate Content
thanks, I can see that update online. The OC200 doesn't detect it yet. Will update this weekend and retry WLAN training.
- Copy Link
- Report Inappropriate Content
I downloaded the update for my OC200 V1 from https://static.tp-link.com/upload/firmware/2023/202304/20230413/OC200(UN)_v1_1.24.0_20230328.zip through the page you linked to.
Tried several times - every time I get a error message "Invalid firmware file" after about 1 minute.
Downloading goes fine, no difference whether I store the file on a local folder or on a network folder. No difference using Chrome or Firefox.
- Copy Link
- Report Inappropriate Content
@Hank21 any recommendation?
- Copy Link
- Report Inappropriate Content
Hi, my OC200 has no similar issue, it is easy to upgrade to v5.9.32.
Did you upgrade the firmware on the local controller? Is the controller running normally and has the internet?
- Copy Link
- Report Inappropriate Content
yes the controller is accessible through local address and in the app both through the cloud or locally. I can manage all network settings through local connection with no problems but the only issue is that I cannot update the firmware. Is there a minimum storage free requirement? My OC200 has 1.9G free space.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1052
Replies: 11
Voters 0
No one has voted for it yet.