High TX/RX Frames
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Moin,
i ran in a bit of an issue with my APs. The tend to be very occupied mostly with the "TX Frames". I did a bit of research and reduced the channel width to 20 MHz, Moved 2 of 3 EAPs (which are EAP265 v1.0 Firmware 5.0.6) to channel 10 & 13 and reduced TX Power to the lowest possible. It solved their occupation but no matter what i do, the EAP 650 Outdoor stays very busy (during my test runs i recognized: its always one EAP thats ridiculously busy - normaly its the EAP 650 outdoor)
The fun part is: there are only three clients linked to it: 2 inverter (Goodwe 10k ET) and one energy meter (My-PV WiFi Meter)
And i got no neighbours, there is nothing for interference except my network.
My built:
ER4811, TL-SG3452, OC300, 3 EAPS: 2xEAP265, 1xEAP650
still waiting for Installation: new 1xEAP650 outdoor, recycle EAP110 outdoor (first i need to solve that traffic issue)
planned 2023: TL-SG3452XP (POE will be in heavy use)
Firmware is up to date.
Im running out of ideas. Help?
