DNS Caching + IPV6 doesnt seem to cache
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Is there any possibility of DNS Caching enabled for IPV6 responses? Currently all the caches are populated with only v4 addresses. Moreover there is a performance degradation by enabling DNSSEC OR DOT or DOH with DNSCaching when IPV6 enabled. So I have to disable DNS Caching altogether. Are you able to implement anything in future which will make dns caching work on IPV6 and DNSSEC be applied simultaneously.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
it's not ipv6 ready on this router. its design is generally based on ipv4. really suggest you turn ipv6 off. i don't run into issues with performance.
- Copy Link
- Report Inappropriate Content
Hi @vnan1829
Thanks for your valuable feedback and post here. This request has been forwarded to the developer team for further evaluation.
You can subscribe to the firmware release thread which is pinned on the related page. Or pay attention to our official website where most releases will show up there very soon.
As a reminder, any request will be evaluated by our developer team before it is officially added to the roadmap. That may take some time before you see a release with this feature.
- Copy Link
- Report Inappropriate Content
@Tedd404 Hi mate, I am using the beta firmware 2.1.4 where ipv6 works. So my question was in the context of enabling ipv6. This was done to get performance gain by eliminating the NAT. Performance gain can be observed, however cannot use the DNSCache feature with it. That's why requesting to support it in future.
- Copy Link
- Report Inappropriate Content
Further to update. After playing with some settings, DNS caching with IPV6 seems to work in some cases.
1. Change the WAN connection to 6to4tunnel type.
2. Change the DNS config in WAN's advanced settings to use ipv6 public dns servers.
Upon doing 1 & 2, DNS Caching works with both v4 and v6.
However, still there is a scope to improve this in DOT, DOH and DNSSec implementations, where currently only ipv4 configurations are allowed.
Also, currently only ipv4 and v6 addresses are allowed in the dns server configurations, I think it should allow domain names as well. Some DNS subscriptions give dns domain names for configuration where ip's are bound to change frequently in a cloud setup.
- Copy Link
- Report Inappropriate Content
ipv6 firewall is not enabled on it yet. and probably comes a long way before ipv6 firewall. more like an ipv4-ready router.
- Copy Link
- Report Inappropriate Content
@Tedd404 Thank you very much, that's an eye-opener for me. Then, is it better off disabling ipv6?
- Copy Link
- Report Inappropriate Content
i don't have much knowledge of ipv6 as I am not using ipv6 for myself. haven't dug into this yet.
but from some video I watched, I think better turn if off as ipv6 allows passthrough
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 622
Replies: 7
Voters 0
No one has voted for it yet.