ER7206 - Router log
Where is the router log which shows blocked and allow events?
We troubleshoot our logs regularly to determine who and what is attempting to get through our routers.
I'm trying this router in a test environment, and don't see a usable log.
Example:
I would like to see events that are blocked, allowed (to pass thru), source ip, destination ip, source port, destination port.
Is there such a log?
Regards,
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
nah
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
You can with a SysLog server running and SNMP linked to it.
Assuming the ER meant enterprise is def a big fall without researching your device, datasheet, and hands on testing.
- Copy Link
- Report Inappropriate Content
Hi @grapes
Thanks for posting in our business forum.
We don't have this feature and so far have no plans for it. Can you please list some of the other vendors that have this feature? I mean commercial vendors like UBNT or Cisco, not open-source firmware.
Is that okay for you to receive tons of logs if this is implemented as a toggle option? I mean if you browse many sites a day, probably you, a single device, will have 10,000 logs generated a day and require a separate location(a computer's drive) for storage, similar to the remote syslog feature, is that okay for you?
Note that the space for storage on pre-built routers is very limited. There is no way that our router keeps the log which would definitely slow the device.
If you can live with that, and other people's okay with this, I think I can send a request to the dev for evaluation. I cannot guarantee it'll be implemented, but I can do my best to gather your ideas and market status and push a key opinion (feature) from the people.
- Copy Link
- Report Inappropriate Content
The routers we use are Zyxel. The TP-Link was selected to evaluate for some remote offices.
The Zyxel log on our USG 1000 routers keep an 11 page log of 50 entries.
Only firewall rules which are defined to create a log entry write to the log.
I'm interested in the syslog idea...but have not used.
I did some reading on the ER7206, but until you try to use and configure it, do you run into the
issues.
- Copy Link
- Report Inappropriate Content
Hi @grapes
Thanks for posting in our business forum.
Can you let me know the feature name of it? It would be helpful for me to write feedback to the dev. In this feature. So this feature enables you to see src ip ds ip and the same for the ports, is that right?
Can you share a picture of it as well?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 826
Replies: 6
Voters 0
No one has voted for it yet.