Home

Forums

Stories

Knowledge Base

Business Community > All Threads > ER7206 HomeKit Stopped Working After Firmware Upgrade to 1.3.0

< All Threads

ER7206 HomeKit Stopped Working After Firmware Upgrade to 1.3.0

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

ER7206 HomeKit Stopped Working After Firmware Upgrade to 1.3.0

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

jim2cpu

2023-09-10 10:02:11 - last edited 2023-09-11 10:13:30

Posts: 7

Helpful: 1

Solutions: 1

Stories: 0

Registered: 2022-12-31

ER7206 HomeKit Stopped Working After Firmware Upgrade to 1.3.0

2023-09-10 10:02:11 - last edited 2023-09-11 10:13:30

Model: ER7206 (TL-ER7206)

Hardware Version: V1

Firmware Version: 1.3.0

Yesterday morning I finally decided to upgrade my firmware to 1.3.0. The upgrade appeared to work fine and I went on with a busy Saturday. Last evening I noticed that all of my HomeKit devices were not responding. This never happens, so I'm quite confident it was related to the firmware upgrade.

What new settings may have been introduced to cause this behavior? Would any existing settings have seen their configuration changed?

I thought I would ask before I start randomly changing configurations to find the offending setting.

Thank you!

1 Accepted Solution

jim2cpu

LV1

2023-09-11 10:13:27 - last edited 2023-09-11 10:13:30

Posts: 7

Helpful: 1

Solutions: 1

Stories: 0

Registered: 2022-12-31

Re:ER7206 HomeKit Stopped Working After Firmware Upgrade to 1.3.0-Solution

2023-09-11 10:13:27 - last edited 2023-09-11 10:13:30

@Clive_A

Thank you for the reply! I've had mDNS configured and working properly for awhile. I do run multiple VLANs, with the bulk of my IoT devices (controlled by HomeKit) in a dedicated VLAN.

Fortunately, this appears to have been corrected by me... rebooting the router. When in doubt... turn it off and turn it back on. When I did that, HomeKit came back to life. *shrug*

Recommended Solution

2 Reply

Clive_A

2023-09-11 05:48:54

Posts: 5984

Helpful: 2948

Solutions: 1375

Stories: 0

Registered: 2023-06-09

Re:ER7206 HomeKit Stopped Working After Firmware Upgrade to 1.3.0

2023-09-11 05:48:54

Hi @jim2cpu

Thanks for posting in our business forum.

Do you have mutliple VLANs? If yes, that could be an mDNS issue. However, that leads to the next question, have you configured the mDNS repeater on the router before?

If you did not configure mDNS, and you don't have any VLAN either, then this does not seem to be an issue with the router. So, we gotta figure out what kind of issue this is.

Most IoT stuff would experience issues when there are VLANs and the IoT and phones are separated in different networks.

You can try this link first: Troubleshooting mDNS Repeater on the Router Doesn't Take Effect

Based on my experience, HomeKit seems to have mDNS preset on the mDNS repeater function page. Don't have any other clues for me now.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.

jim2cpu

LV1

2023-09-11 10:13:27 - last edited 2023-09-11 10:13:30

Posts: 7

Helpful: 1

Solutions: 1

Stories: 0

Registered: 2022-12-31

Re:ER7206 HomeKit Stopped Working After Firmware Upgrade to 1.3.0-Solution

2023-09-11 10:13:27 - last edited 2023-09-11 10:13:30

@Clive_A

Thank you for the reply! I've had mDNS configured and working properly for awhile. I do run multiple VLANs, with the bulk of my IoT devices (controlled by HomeKit) in a dedicated VLAN.

Fortunately, this appears to have been corrected by me... rebooting the router. When in doubt... turn it off and turn it back on. When I did that, HomeKit came back to life. *shrug*

Information

Helpful: 0

Replies: 2

ER7206 HomeKit Stopped Working After Firmware Upgrade to 1.3.0

ER7206 HomeKit Stopped Working After Firmware Upgrade to 1.3.0

Information

Voters 0

Tags