Business Community > All Threads > File sharing help
< All Threads

File sharing help

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

File sharing help

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
File sharing help
File sharing help
2023-12-12 12:13:29
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version:

Hello!

 

I am looking for some help with setting up file sharing between our small network and a Laser cutter we purchased. 

 

We recently purchased a Bystonic 3015 and after talking with the install crew and tech support they are not allowed to alter or assist with the customer network. 

 

The Laser itself has its own router and network with router address being 192.168.100.200. Our network is very small being 3 computers on the default 192.168.0.1 network. I need to somehow share a folder from our computer(192.168.0.2) to the Laser computer on the 192.168.100.200 network. 

 

Is setting up a vlan the way to accomplish this? 

 

Any help or suggestions are greatly appreciated!!

 

  0      
 
  0      
 
#1
Options
2 Reply
Re:File sharing help
2023-12-13 07:54:41

Hi @Ruckus2020 

Thanks for posting in our business forum.

Diagram first. I have a basic idea about your situation but need a diagram.

To fix this, would be either port forwarding. to fix the NAT issue in your LAN. Or place them in the same LAN under the laser router.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting Manual ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. Don't be a lazy asker. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#2
Options
Re:File sharing help
2023-12-13 21:41:16

  @jhonbenz853 

 

Thank you all for your help and replies!

 

I was able to get the Laser computer to reach the internet. But am still unable to share a folder or map a drive to our computers.

 

Laser Network:

Router(DHCP Off) 192.168.100.200

Subnet mask: 255.255.255.0

Static IP set in Router: 192.168.0.200

Gateway: 192.168.0.1

 

Our Network:

Router: 192.168.0.1

Subnet Mask: 255.255.255.0

Our computers: 192.168.0.2 thru .6

I do not have our computers set static but they are address reserved. 

 

My original thought was to change our network to match the Laser network but was told not to by the install crew as it would cause issues...

 

 

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 284

Replies: 2

Related Articles
Configuring ER605 for windows file sharing
755 0
USB file sharing with USB enabled omada routers.
246 0
priinter & file sharing not working
511 0
Upgrade failed: The upgrade file is invalid. Please select a correct file.
526 0
some users are sharing hotspot
84 0
VPN help newbie
435 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.