Adoption loop with TL-SG2428P
Hi!
Yesterday I wanted to add a new switch to my setup.
My hardware is:
OC200 hardware controller.
HW: v1.0
FW: 1.26.3, Controller Version 5.12.9
Router ER-605 v2
FW: 2.2.3
Switch TL-SG2428P v4.0
FW: 4.0.6
And a couple of different EAPs
Now after over 10 hours waiting time the switch is still in "ADOPTION" state.
In the DEVICES tab, the switch now appears with a new IP-Adress (192.168.40.248). It doesn't have a public IP-Adress. This field is blank.
What steps can I take to find the error other than resetting the entire setup?
I have already tried to factory reset the switch. But this didn't help.
I hope someone can give advice on this topic.
Thanks a lot.
Patrick