system time problem 2006-01-01 08:00 for T2600G-28TS

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

system time problem 2006-01-01 08:00 for T2600G-28TS

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
system time problem 2006-01-01 08:00 for T2600G-28TS
system time problem 2006-01-01 08:00 for T2600G-28TS
2024-01-25 03:00:08 - last edited 2024-01-26 01:41:33
Hardware Version: V3
Firmware Version: 3.0.3

System time problem for T2600G-28TS


After manual set the system time to current time, e.g. 2024-01-25 10:45

save config

reboot switch

the switch system time went back to 2006-01-01 08:00

 

Simple:

For each reboot, or (shutdown & power on), then system time will go back to 2006-01-01 08:00

 

 

save config

reboot

Time go back to 2006-01-01

 

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:system time problem 2006-01-01 08:00 for T2600G-28TS-Solution
2024-01-25 05:48:56 - last edited 2024-01-26 01:41:33

Hi @comp-eng-louis 

Thanks for posting in our business forum.

This is expected to be normal. The flash does not save time but requires you to sync manually.

Or if your model supports the Omada controller, you can use the controller to proactively sync the time to the switch.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  0  
  0  
#2
Options
2 Reply
Re:system time problem 2006-01-01 08:00 for T2600G-28TS-Solution
2024-01-25 05:48:56 - last edited 2024-01-26 01:41:33

Hi @comp-eng-louis 

Thanks for posting in our business forum.

This is expected to be normal. The flash does not save time but requires you to sync manually.

Or if your model supports the Omada controller, you can use the controller to proactively sync the time to the switch.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  0  
  0  
#2
Options
Re:system time problem 2006-01-01 08:00 for T2600G-28TS
2024-01-29 04:08:45

  @comp-eng-louis 


Noted

Thanks a lot

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 340

Replies: 2

Related Articles