Future Consideration ER707-M2 and multiple public IP addresses when using PPoE
I have a ER707-M2 v1.0 WAN connected via PPPoE.
This means I cannot define a static WAN IP address.
A static WAN IP address is a requirement for One-To-One NAT to be able to use multiple public ip addresses.
How can this problem be solved?
I need to be able to use the extra external ip addresses I have.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
the same question was raised regarding the ER605 here https://community.tp-link.com/en/business/forum/topic/619182?replyId=1241592 and it was not possible.
I dont know, but I would suspect that the firmware for the ER707 is not that different to the ER605 , so almost certainly not possible on that either.
Also Openwrt doesnt seem to be an option on the ER707 either...
- Copy Link
- Report Inappropriate Content
Hi @cdnhk
Thank you for your feedback and post. We have forwarded your request to our developer team for evaluation.
To stay updated on firmware releases, we recommend subscribing to the pinned thread on the related page or regularly checking our official website where new releases are typically announced promptly. Get the Latest Firmware Releases for Omada Routers Here - Subscribe for Updates
Please note that all requests undergo a thorough evaluation by our developer team before being added to the roadmap. This process may take some time, so please be patient if you don't see immediate results. Features with lower priority or fewer user reports might experience delays in implementation as we gather more feedback and compare it with competitor products.
It is important to understand that submitting a request does not guarantee its implementation; only requests that pass the evaluation will be considered for inclusion in future updates.
- Copy Link
- Report Inappropriate Content
Late response but could there be a workaround?
Other posts mention that One-To-One NAT is possible with a Static IP address.
And indeed if I disable the Advanced option "Get IP Address from ISP", One-To-One NAT functionality becomes available.
But I still need to configure the static IP address (subnet) I got from the ISP. Should this be defined at the Secondary connection?
The documentation does not give me much info about the Secondary connection option.
- Copy Link
- Report Inappropriate Content
Hi @cdnhk
cdnhk wrote
Late response but could there be a workaround?
Other posts mention that One-To-One NAT is possible with a Static IP address.
And indeed if I disable the Advanced option "Get IP Address from ISP", One-To-One NAT functionality becomes available.
But I still need to configure the static IP address (subnet) I got from the ISP. Should this be defined at the Secondary connection?
The documentation does not give me much info about the Secondary connection option.
I don't think there might be a workaround to this yet.
If you know the IP address of your second IP, and parameters, put them there and try to connect. You should get at least two IP addresses. One is automatic from your authentication after the PPPoE dialing. Second IP is up to your ISP as well.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 635
Replies: 4