Business Community > All Threads > ER707-M2 PPPoE Static IP secondary connection issue
< All Threads
 
1
Votes

Future Consideration ER707-M2 PPPoE Static IP secondary connection issue

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
 
1
Votes

Future Consideration ER707-M2 PPPoE Static IP secondary connection issue

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Future ConsiderationER707-M2 PPPoE Static IP secondary connection issue
ER707-M2 PPPoE Static IP secondary connection issue
2024-01-30 03:48:32 - last edited 2024-09-03 03:27:07

Hi,

 

My ISP provide 10 static IP over PPPoE connection. I try to setup connection with fixed IP provide by ISP but seems failed. In order to work i need to use PPPoE to dial the connection. However, when i try to add for the secondary connetion IP is getting failed to get connect. 

 

Since i got 10 static IP, how can i configure to use my static IP as when trying to configure NAT it doesn't work on PPPoE connection. 

 

1.  NAT one to one is only work on WAN Static IP and but not with PPPoE. 

2. I've enable policy routing for source and destination any to any via WAN it also failed to get route. 

 

#1
Options
3 Reply
Re:ER707-M2 PPPoE Static IP secondary connection issue
2024-01-30 03:49:30 - last edited 2024-01-31 06:16:17

refer with the logs

MGS-Greek wrote

Hi,

 

My ISP provide 10 static IP over PPPoE connection. I try to setup connection with fixed IP provide by ISP but seems failed. In order to work i need to use PPPoE to dial the connection. However, when i try to add for the secondary connetion IP is getting failed to get connect. 

 

Since i got 10 static IP, how can i configure to use my static IP as when trying to configure NAT it doesn't work on PPPoE connection. 

 

1.  NAT one to one is only work on WAN Static IP and but not with PPPoE. 

2. I've enable policy routing for source and destination any to any via WAN it also failed to get route. 

 

 

MGS-Greek wrote

Hi,

 

My ISP provide 10 static IP over PPPoE connection. I try to setup connection with fixed IP provide by ISP but seems failed. In order to work i need to use PPPoE to dial the connection. However, when i try to add for the secondary connetion IP is getting failed to get connect. 

 

Since i got 10 static IP, how can i configure to use my static IP as when trying to configure NAT it doesn't work on PPPoE connection. 

 

1.  NAT one to one is only work on WAN Static IP and but not with PPPoE. 

2. I've enable policy routing for source and destination any to any via WAN it also failed to get route. 

 

 

#2
Options
Re:ER707-M2 PPPoE Static IP secondary connection issue
2024-01-31 02:18:10 - last edited 2024-01-31 06:16:17

Hi @MGS-Greek 

Thanks for posting in our business forum.

One-to-One NAT only supports a static IP address on WAN now.

Request has been noted.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
#3
Options
Re:ER707-M2 PPPoE Static IP secondary connection issue
2024-01-31 02:41:32 - last edited 2024-01-31 06:16:17

 

UPVOTED.  I could also use this feature on my 707-M2, as I have 2 IPs provided via PPPoE, only one of which I can currently use.

<< Paying it forward, one juicy problem at a time... >>
#4
Options

Information

Helpful: 1

Views: 928

Replies: 3

Voters 1

voter's avatar
Related Request
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.