ER605, WAN to LAN communication, Wireguard
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
ER605, WAN to LAN communication, Wireguard
Tags:
#WireGuard
In my setup of Wireguard, I am able to connect but unable to see LAN side of router.
The WAN side has a public static IP address (Passthrough from fiber modem/router)
The LAN side is set to 192.168.5.201
When I connect to the WAN side via Wireguard VPN, I am able to use internet, ping WAN ip, WAN gateway, DNS servers, everything going out from that network.
However I am unable to connect to anything connected or plugged into the LAN ports including 192.168.5.201.
How do I get the WAN side to see the LAN side?
I do not know anything about vlans, routing etc.
Thank you I appreciate any help.
1 Accepted Solution
Re:ER605, WAN to LAN communication, Wireguard-Solution
Best Regards!
If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post.
Look for a model? Search your model NOW
Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚
☛ ★ Configuration Guide ★ ☚
☛ ★ Knowledge Base ★ ☚
☛ ★ Troubleshooting ★ ☚
● Be kind and nice.
● Stay on the topic.
● Post details.
● Search first.
● Please don't take it for granted.
● No email confidentiality should be violated.
● S/N, MAC, and your true public IP should be mosaiced.
Re:ER605, WAN to LAN communication, Wireguard-Solution
Best Regards!
If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post.
Look for a model? Search your model NOW
Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚
☛ ★ Configuration Guide ★ ☚
☛ ★ Knowledge Base ★ ☚
☛ ★ Troubleshooting ★ ☚
● Be kind and nice.
● Stay on the topic.
● Post details.
● Search first.
● Please don't take it for granted.
● No email confidentiality should be violated.
● S/N, MAC, and your true public IP should be mosaiced.