Change SSID via SSH

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Change SSID via SSH

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Change SSID via SSH
Change SSID via SSH
2024-03-11 03:48:11 - last edited 2024-03-13 07:35:53
Model: EAP110-Outdoor  
Hardware Version: V3
Firmware Version:

Hello.

I need to change the SSID via SSH. I can only log in with admin user but not with root user.

In my scenario I can not use Omada Controller neither reset to factory defaults.

I logged in as admin and I found a file where the SSID is stored but it is write protected.

Why is that so dificult to manage my EAP 110 via SSH? And why there is even an option in the web interface to enable SSH if I can't do anything with it?

 

Thank you.

  0      
  0      
#1
Options
1 Accepted Solution
Re:Change SSID via SSH-Solution
2024-03-12 09:11:38 - last edited 2024-03-13 07:35:53

Hi @gboaron 
Thanks for posting in our business forum.
We don't offer a CLI guide for EAP instead we have CLI guides for Switch and Routers.

SSH does not always provide you with a way to configure it. Sometimes, we require SSH to debug. That's the reason why it is there.

 

Omada Controller does not support SSH either. SSH in controller mode which enables the access to the SSH of the adopted devices.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#2
Options
1 Reply
Re:Change SSID via SSH-Solution
2024-03-12 09:11:38 - last edited 2024-03-13 07:35:53

Hi @gboaron 
Thanks for posting in our business forum.
We don't offer a CLI guide for EAP instead we have CLI guides for Switch and Routers.

SSH does not always provide you with a way to configure it. Sometimes, we require SSH to debug. That's the reason why it is there.

 

Omada Controller does not support SSH either. SSH in controller mode which enables the access to the SSH of the adopted devices.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#2
Options

Information

Helpful: 0

Views: 407

Replies: 1

Related Articles