SG3428XMP v3.20 using 10Gig RJ45's for trunk links

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

SG3428XMP v3.20 using 10Gig RJ45's for trunk links

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
SG3428XMP v3.20 using 10Gig RJ45's for trunk links
SG3428XMP v3.20 using 10Gig RJ45's for trunk links
2024-03-28 00:10:42 - last edited 2024-04-01 02:54:34
Tags: #SFP
Model: TL-SG3428XMP  
Hardware Version: V3
Firmware Version: 3.20

Anyone know if , or if will ever, support copper trunks on 10 Gig SFP?

 

Its a lot easier than running fiber... and I have 10 gig compliant copper in place already.

 

bench tests with Cisco SFP-10G-T-X are not resulting in any link. 

  0      
  0      
#1
Options
1 Accepted Solution
Re:SG3428XMP v3.20 using 10Gig RJ45's for trunk links-Solution
2024-03-28 03:38:05 - last edited 2024-04-01 02:54:34

Hi @KillerMBunny 

Thanks for posting in our business forum.

KillerMBunny wrote

  @Clive_A 

 

my config has nothing to do with it if the sfp's aren't recognized.... no layer 1

 

is there a compatibility list of approved sfp's for this switch?

If the switch does not recognize it, then it is layer 1.

Trunk is not referring to the VLAN?

With this additional description, it is SFP interface does not work with the Cisco SFP modules?

 

Our switches work with our modules. For a list, read the datasheet of your model. The list is at the end of the datasheet.

Models available for 10G RJ45.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#4
Options
3 Reply
Re:SG3428XMP v3.20 using 10Gig RJ45's for trunk links
2024-03-28 02:47:14

Hi @KillerMBunny 

Thanks for posting in our business forum.

I don't think they correlate. Regardless of the layer 1, layer 2 can always allow you to trunk. Software allows you to trunk.

You should check your VLAN config. If you believe you are correct, post your config here for re-examination.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#2
Options
Re:SG3428XMP v3.20 using 10Gig RJ45's for trunk links
2024-03-28 02:53:12

  @Clive_A 

 

my config has nothing to do with it if the sfp's aren't recognized.... no layer 1

 

is there a compatibility list of approved sfp's for this switch?

  0  
  0  
#3
Options
Re:SG3428XMP v3.20 using 10Gig RJ45's for trunk links-Solution
2024-03-28 03:38:05 - last edited 2024-04-01 02:54:34

Hi @KillerMBunny 

Thanks for posting in our business forum.

KillerMBunny wrote

  @Clive_A 

 

my config has nothing to do with it if the sfp's aren't recognized.... no layer 1

 

is there a compatibility list of approved sfp's for this switch?

If the switch does not recognize it, then it is layer 1.

Trunk is not referring to the VLAN?

With this additional description, it is SFP interface does not work with the Cisco SFP modules?

 

Our switches work with our modules. For a list, read the datasheet of your model. The list is at the end of the datasheet.

Models available for 10G RJ45.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#4
Options

Information

Helpful: 0

Views: 306

Replies: 3

Tags

Related Articles