Omada hardware controller oc300 ethernet ports

Omada hardware controller oc300 ethernet ports

Omada hardware controller oc300 ethernet ports
Omada hardware controller oc300 ethernet ports
2024-04-25 18:45:01
Hardware Version: V5
Firmware Version:

Can I set up the two Ethernet ports on the controller separately? Like, can each port have its own IP address?

  0      
  0      
#1
Options
4 Reply
Re:Omada hardware controller oc300 ethernet ports
2024-04-26 05:34:03

 

cromero wrote

Can I set up the two Ethernet ports on the controller separately? Like, can each port have its own IP address?

Hi @cromero 

We are not able to configure the VLAN on the port of hardware controller currently. Thanks for your feature request. I have marked down your request and forward to the developer department. Please note that we cannot guarantee the implementation of all the feature requests. Please keep an eye on our official website and forum for any updates!
 

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#2
Options
Re:Omada hardware controller oc300 ethernet ports
2024-04-26 14:54:00

  @cromero 

 

Strange request given what the controller is supposed to be in the architecture.  What is the utility of the second IP, that cannot be achieved with a single IP?

<< Paying it forward, one juicy problem at a time... >>
  0  
  0  
#3
Options
Re:Omada hardware controller oc300 ethernet ports
2024-05-09 23:35:32

I am still waiting for @Hank21 words to see this to the support team. This leads me to the question: what happens when I connect 1 port to VLAN 1 and the other port to the other VLAN?

 

thank you.

  0  
  0  
#4
Options
Re:Omada hardware controller oc300 ethernet ports
2024-05-10 00:26:06
Think of it as a dumb, unmanaged 3-port switch, two external ports and 1 internal for the controller.
<< Paying it forward, one juicy problem at a time... >>
  0  
  0  
#5
Options