I CANT USE IP ADDRESS IN API - EXTERNAL PORTAL

I CANT USE IP ADDRESS IN API - EXTERNAL PORTAL

I CANT USE IP ADDRESS IN API - EXTERNAL PORTAL
I CANT USE IP ADDRESS IN API - EXTERNAL PORTAL
2024-05-02 21:38:45 - last edited 2024-05-02 21:42:54
Model: OC200  
Hardware Version: V5
Firmware Version: 5.13

Hello everyone, i need urgency help am trying to set up external portal server for authentication, i have setup everything correctly the problem is in API there are parametres i need to FILL

https://CONTROLLER:PORT/CONTROLLER_ID/api/v2/hotspot/login

I have controller ID but what  do i fill in CONTROLLER??? 

i have tried to use port forwading from my router to my controller in my  network but badluck the ISP block all the ports in our country because its shared internet, so what do i put 

in CONTROLLER:PORT any workaround please am stuck for 4 days, i cant use IP ADDRESS

  0      
  0      
#1
Options
2 Reply
Re:I CANT USE IP ADDRESS IN API - EXTERNAL PORTAL
2024-05-05 10:48:53

 

voos wrote

Hello everyone, i need urgency help am trying to set up external portal server for authentication, i have setup everything correctly the problem is in API there are parametres i need to FILL

https://CONTROLLER:PORT/CONTROLLER_ID/api/v2/hotspot/login

I have controller ID but what  do i fill in CONTROLLER??? 

i have tried to use port forwading from my router to my controller in my  network but badluck the ISP block all the ports in our country because its shared internet, so what do i put 

in CONTROLLER:PORT any workaround please am stuck for 4 days, i cant use IP ADDRESS

Hi @voos 

Have you tried to refer to the API and Code sample for External Portal Server instruction? There are examples for reference.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#2
Options
Re:I CANT USE IP ADDRESS IN API - EXTERNAL PORTAL
2024-05-07 17:16:33

  @Hank21 i think you didnt get it, everything is fine and good the only problem is what do i fill in CONTROLLER??? I have port and i have ID the only problem is CONTROLLER as in API it says i need to fill controller IP address but in some countries ISP block ports coz its shared internet. so what do i fill???

  0  
  0  
#3
Options