Why cant the SG1016PE integrate into the Omada SD

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Why cant the SG1016PE integrate into the Omada SD

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Why cant the SG1016PE integrate into the Omada SD
Why cant the SG1016PE integrate into the Omada SD
2024-05-06 19:23:26 - last edited 2024-05-13 06:57:15
Model: TL-SG1016PE  
Hardware Version: V1
Firmware Version:

The SG1016PE has a web interface and even a software interface so seems like it should easily be able to be implemented into the Omada SDN, so will it ever be? 

  1      
  1      
#1
Options
1 Accepted Solution
Re:Why cant the SG1016PE integrate into the Omada SD-Solution
2024-05-07 03:45:53 - last edited 2024-05-13 06:57:15

Hi @eblieb 

Thanks for posting in our business forum.

For this model, or any model from the product line of the SG1000 series, is not a part of the Omada system. We do not intend to implement the Omada adoption/control to these models.

These models are entry-level layer 2 switches and all controllable models from the Omada product line are layer 2+ or layer 3. This is an obvious distinction from our product team to separate them into layers/levels.

 

Not to mention that the RAM and other hardware aspects of these models may not meet or catch the minimum hardware requirement of the Omada switch.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#2
Options
1 Reply
Re:Why cant the SG1016PE integrate into the Omada SD-Solution
2024-05-07 03:45:53 - last edited 2024-05-13 06:57:15

Hi @eblieb 

Thanks for posting in our business forum.

For this model, or any model from the product line of the SG1000 series, is not a part of the Omada system. We do not intend to implement the Omada adoption/control to these models.

These models are entry-level layer 2 switches and all controllable models from the Omada product line are layer 2+ or layer 3. This is an obvious distinction from our product team to separate them into layers/levels.

 

Not to mention that the RAM and other hardware aspects of these models may not meet or catch the minimum hardware requirement of the Omada switch.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#2
Options

Information

Helpful: 1

Views: 314

Replies: 1

Related Articles