mDNS - Gateway vs AP
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi,
Although new to mDNS, I have set up a working config to advertise Spotify devices from my LAN(1) to my GUESTLAN (10).
My question is about understanding the Gateway vs AP options, as I can't find any suitable explanation. I assume that both options are 'repeaters' but could someone:
a) explain the differences?
b) is there a benefit of one over the other, or particular scenarios where you would choose one over the other?
c) are there any security considerations?
d) and lastly ..... is there a way of clearing any mDNS information throughout the network and clients, if I wanted a 'clean canvas' for testing?
Many thanks in advance,
Mike
My infrastructure stack involves Mesh and consists of various quantities of:
OC200 HW v2.0, FW v2.14.4 Build 20240304 Rel.54311 and SDN v5.13.30.20 with USB storage
ER605 HW v2.0 and FW v2.2.4 Build 20240119 Rel.44368
SG2210MP HW v4.0 and FW v4.20.1 Build 20240115 Rel.72847
EAP650 HW v1.0 and FW v1.0.13 Build 20240131 Rel. 45057
SG2210P HW v5.0 and FW v5.20.1 Build 20240202 Rel 75644
Hi @mortimm
Thanks for posting in our business forum.
a) From different layers. Gateway is universal to the whole subnet you've selected. L3. AP, L2. You should see the difference in its config.
From the gateway, it applies to the whole network regardless of whether you have an AP or not.
b) As above.
c) I don't know how to answer this. You should first know what mDNS is used for. Should be no. But you should ask yourself if you are worried about the security, why do you need a cross-VLAN discovery?
If you have blocked the comm between the VLANs due to security concerns, then mDNS is blocked as well by default.
d) Do you mean that you want to clean the mDNS cache? You should refer to the commands on different systems. The cache is not stored on the router.
Hi @mortimm
Thanks for posting in our business forum.
a) From different layers. Gateway is universal to the whole subnet you've selected. L3. AP, L2. You should see the difference in its config.
From the gateway, it applies to the whole network regardless of whether you have an AP or not.
b) As above.
c) I don't know how to answer this. You should first know what mDNS is used for. Should be no. But you should ask yourself if you are worried about the security, why do you need a cross-VLAN discovery?
If you have blocked the comm between the VLANs due to security concerns, then mDNS is blocked as well by default.
d) Do you mean that you want to clean the mDNS cache? You should refer to the commands on different systems. The cache is not stored on the router.